4 The “Local Port Support” screen appears. Select the port driver to be installed and then click the [Next] button. For Serial or Ethernet interface, do not select any printer driver and click [Next] button.
Item
Description
Automatically install detected USB devices. | When this is checked, the Plug and Play function will |
| be enabled for the TM printer equipped with the USB |
| interface. If this is not checked, the printer driver |
| cannot be installed by the Plug and Play function. |
|
|
Launch StatusViewer on login. | When this is checked, the Status Viewer |
automatically starts to run when you login the | |
| computer. |
|
|
5
6
The “Printer Configuration” screen appears. When installing the printer driver as well as the APD, click the [Add] button.
The Add Printer screen appears. Configure the printer driver and port to use, and click the [Next] button.
Setting
Description
Select driver | Select the printer driver to be installed. | |
|
| |
Printer name | The printer driver name. This is changeable. | |
| Do not use | |
|
| |
Communication | Select the type of interface to connect the computer and printer. | |
| Create a Parallel port: | Proceed to Step 7. |
| Create a Serial port: | Proceed to Step 8 |
| Create an Ethernet port: | Proceed to Step 9. |
| Create a USB port: | Proceed to Step 10. |
|
| |
Set as Default Printer | Check when configuring the printer as that normally used from the | |
| Windows applications. |
|
|
|
|
7 The “Parallel Port Settings” screen appears. Configure the settings of the Parallel port and click the [Next] button. Proceed to Step 10.
Setting
Description
Printer name | The printer name you entered at Step 6 is displayed. This cannot be |
| changed. |
|
|
LPT Port | Specify the number of parallel port used for connecting the printer. |
| Usually, the port number is automatically displayed and no setting is |
| required. |
|
|
56