Epson M00002112 install manual When connecting Customer Display To TM printer

Page 32

When connecting Customer Display

to TM printer

This section explains how to install the APD when connecting a Customer Display to a TM printer. For the APD of version 4.07 or later, the printer drivers for both 32 bit and 64 bit version OS are installed.

Installation Flow

1.Installation when using pass-through connection (page 32) Installation when using Y-connection (page 36)

2.Connecting the devices (page 40)

3.Test print/display (page 41)

Installation when using pass-through connection

Serial

Serial

Modular

The pass‐through connection is a connection method to connect the computer and the TM printer via the Customer Display.

The serial interface must be used and the communication settings on each of the three devices must be the same. For information on DIP switch / Memory switch settings on the Customer Display and the TM printer, see the Userʹs Manual supplied with the TM printer or the Technical Reference Guide.

32

Image 32

Contents Overview Installation and SetupSilent Installation Trademarks Restriction of Use For SafetyKey to Symbols Aim of the Manual Manual ContentAbout this Manual Contents When connecting Customer Display to TM printer APD installer APD4xxE.exe Manual/Sample installer APDMANEx.exeIntroduction Package organizationManual organization Operating Environment ComputerApplication NET Framework VersionInterface Supported Models APD 4.xx supports the following modelsConnection Pattern Pass-through connectionConnecting cable Pass-through Y connectionDifferences Depending on the OS DescriptionRestrictions APDInstallation Manuals/Sample ProgramsUninstallation Reference page of other OSPage Installation and Setup Installation methods Standard InstallationStandard Install Installation FlowPage Setting Description Specify the stop bits Installation and Setup APD is installed Connecting the TM Printer Wireless LAN Ieee 802.11b connectionParallel LPT connection Serial COM connectionUSB connection Print Test Other OSUninstallation Installation and Setup When connecting Customer Display To TM printer Installation when using pass-through connectionFollow the procedure below Specify the stop bits Setting Description Installation when using Y-connection Follow the procedure below Specify the stop bits Installation and Setup Connecting the devices Customer Display Test print/displayTM printer Plug and Play Installing the printer driver Connect the TM printerCustom Install Features Description Setting Description Required Other OS Shared Printer Page Installation and Setup Uninstalling the shared printer Uninstalling the APD Follow the procedures below to uninstall the APDTion of the APD is completed Maintenance after Installing the APD Adding the printer driverSetting Description Drivers, configured between to , appear in the list Uninstalling the printer driver Replacing a printer Interface DescriptionPage Upgrade Install of the APD Upgrade installation of the APD starts Silent Installation What Is a Silent Installation?Setting the APD Environment To Be Copied Flow of the Silent InstallationAPD Setting Making the system settingCreating a Package or Script file Setting Description Maintenance Complete screen appears. Click the Finish button Installing using the silent installation package Executing the Silent InstallationHow to execute the Silent Installation Checking the Installation Result Command OptionsF1 Silent installation using the script file UpgradeUninstall Silent Uninstallation Display the silent installation result in a dialogRestart setting after the installation Specify the install log file