Epson M00002112 install manual Setting Description

6 The “Local port support” screen appears. Select the port driver to be installed and then click the [Next] button. For Serial or Ethernet interface, do not select any printer driver and click [Next] button.

Item

Description

Automatically install detected USB devices.	When this is checked, the Plug and Play function will
	be enabled for the TM printer equipped with the USB
	interface. If this is not checked, the printer driver
	cannot be installed by the Plug and Play function.
Launch StatusViewer on login.	When this is checked, the Status Viewer
(TM-C100 is needed)	automatically starts to run when you login the
	computer.

7

8

The “Printer Configuration” screen appears. When installing the printer driver as well as the APD, click the [Add] button.

The “Add Printer” screen appears. Configure the printer driver and port to use, and click the [Next] button.

Setting

Description

Select driver	Select the printer driver to be installed.
Printer name	The printer driver name. This is changeable.
	Do not use Unicode/2-byte characters for the name.
Port Type	Select the type of interface to connect the computer and printer.
	Create a Parallel port:	Proceed to Step 9.
	Create a Serial port:	Proceed to Step 10.
	Create an Ethernet port:	Proceed to Step 11.
	Create a USB port:	Proceed to Step 12.
Set as Default Printer	Check when configuring the printer as that normally used from the
	Windows applications.

46