Epson M00002112 install manual Print Test, Other OS

Page 29

Chapter 2 Installation and Setup

Print Test Page

After installing the APD, execute test print to check if the APD is properly installed and work normally.

Perform Print Test Page in the following procedures.

1

Open the Printers screen from [Start] - [Control Panel]. Right click the

 

printer driver you have installed and select [Properties] (Reference page

 

of other OS.).

2

The Properties screen of the printer appears. Click the [Print Test Page]

 

button to start test printing.

2

Print Test Page of the APD does not print all the data, unlike normal Print Test Page

does.

The Print Test Page prints characters and images as an image. The data volume is large for serial connection and may take longer to print compared with other interfaces.

3 The following screen appears. If the test print was output correctly, click the [Close] button. If the test print was not output correctly, click the [Troubleshoot...] button and perform troubleshooting in accordance with the Windows message.

29

Image 29
Contents Overview Installation and SetupSilent Installation Trademarks Restriction of Use For SafetyKey to Symbols Aim of the Manual Manual ContentAbout this Manual Contents When connecting Customer Display to TM printer Manual/Sample installer APDMANEx.exe APD installer APD4xxE.exeIntroduction Package organizationManual organization Computer Operating EnvironmentApplication NET Framework VersionInterface APD 4.xx supports the following models Supported ModelsPass-through connection Connection PatternPass-through Y connection Connecting cableDescription Differences Depending on the OSAPD RestrictionsManuals/Sample Programs InstallationReference page of other OS UninstallationPage Installation and Setup Standard Installation Installation methodsInstallation Flow Standard InstallPage Setting Description Specify the stop bits Installation and Setup APD is installed Wireless LAN Ieee 802.11b connection Connecting the TM PrinterParallel LPT connection Serial COM connectionUSB connection Other OS Print TestUninstallation Installation and Setup Installation when using pass-through connection When connecting Customer Display To TM printerFollow the procedure below Specify the stop bits Setting Description Installation when using Y-connection Follow the procedure below Specify the stop bits Installation and Setup Connecting the devices Customer Display Test print/displayTM printer Plug and Play Connect the TM printer Installing the printer driverCustom Install Features Description Setting Description Required Other OS Shared Printer Page Installation and Setup Uninstalling the shared printer Follow the procedures below to uninstall the APD Uninstalling the APDTion of the APD is completed Adding the printer driver Maintenance after Installing the APDSetting Description Drivers, configured between to , appear in the list Uninstalling the printer driver Interface Description Replacing a printerPage Upgrade Install of the APD Upgrade installation of the APD starts What Is a Silent Installation? Silent InstallationFlow of the Silent Installation Setting the APD Environment To Be CopiedMaking the system setting APD SettingCreating a Package or Script file Setting Description Maintenance Complete screen appears. Click the Finish button Installing using the silent installation package Executing the Silent InstallationHow to execute the Silent Installation Command Options Checking the Installation ResultF1 Silent installation using the script file UpgradeDisplay the silent installation result in a dialog Uninstall Silent UninstallationSpecify the install log file Restart setting after the installation