Epson M00002112 install manual Follow the procedure below

	Chapter 2 Installation and Setup
Follow the procedure below.
1	Double click the [APD] icon and start the installation.
2	The Install ShieldWizard screen appears. Click the [Next] button.
3	The “License Agreement” screen appears. Read the content and select
	"I accept the terms of the license agreement". Then click the [Next]
	button.
4	The “Setup Type” screen appears. Select "Standard", then click the
	[Next] button.
5	The “Printer Configuration” screen appears. Click the [Add] button.
6	The “Add Printer” screen appears. Select a printer driver and port to be	2
	used for the TM printer, and click the [Next] button.

Setting

Description

Select driver	Select the printer driver to be installed.
Printer name	The printer driver name. This is changeable.
	Do not use Unicode/2-byte characters for the name.
Port Type	Select the type of interface to connect the computer and printer.
	Create a Serial port:	Proceed to Step 7.
	Create a USB port:	Proceed to Step 8.
Set as Default Printer	Check when configuring the printer as that normally used from the
	Windows applications.

37