Chapter 2 Installation and Setup 
8 The “Serial Port Settings” screen appears. Configure the settings of the Serial port and click the [Next] button. Proceed to Step 10.
Setting
Description
Printer name | The printer name you entered at Step 6 is displayed. This cannot be |
| changed. |
|
|
COM Port | Specify the number of serial port used for connecting the printer. |
|
|
Baud Rate | Specify the baud rate. |
|
|
Data Bits | Specify the data bits. |
|
|
Stop Bits | Specify the stop bits. |
|
|
Flow Control | Specify the method of data flow between the computer and the printer. |
|
|
Parity | Specify the parity. |
|
|
9 The “Ethernet Settings” screen appears. Configure the IP Address of the TM printer and click the [Next] button. Proceed to Step 10.
Setting | Description |
Printer name | The printer name you entered at Step 6 is displayed. This cannot be |
| changed. |
|
|
IP address | Enter the printer IP address. |
| To find the information about IP Address of the TM printer, see the |
| Technical Reference Guide of each TM printer. |
|
|
2
10 | The display returns to the “Printer Configuration” screen. All the printer |
| drivers, configured between Step 6 to Step 9, appear in the list. |
| To install multiple printer drivers, repeat Step 5 to Step 9. To install the |
| same printer driver multiple times, click the [Copy] button. |
| When the settings of the printer drivers are finished, click the [Next] |
| button. |
11 | The “Start Copying Files” screen appears. Confirm the printer driver to |
| be installed which is displayed in "Current Settings" and then click the |
[Next] button.
12
13
The printer driver added in the list at Step 10 is installed.
The “Maintenance Complete” screen appears. When you click the [Finish] button, the process of installing the printer driver ends.
57