Orion Car Audio XTR124, XTR154, XTR122, XTR152 WHAT’S in the BOX, Tools of the Trade, Installation

Page 3

WHAT’S IN THE BOX

Included in this box are all the necessary mounting hardware and cables for your basic installation. Listed below is a detailed list of the components included in this system package.

Quantity

Description

1

Owner's Manual

1

Orion XTR woofer

1

Mounting template

1

Trim ring

TOOLS OF THE TRADE

Listed are the majority of the tools required to perform the installation. Having the proper tools will make the installation much easier. It is very difficult when you get half way through the installation and discover that you require a specific tool to get yourself through a particular part of the installation. Some of these tools are necessities. Some make the job much easier.

Marking Pen

Electric Drill and assorted Bits

Phillips Screwdriver

Wire Strippers

Allen Wrenches

Volt/Ohm Meter (Optional)

Table Saw

Jig Saw

Wire Cutters

Wire Crimpers

INSTALLATION

The performance of these XTR subwoofers is directly proportional to the quality of the installation. Care taken with the installation process will be rewarded by years of satisfying performance. If you are unsure of your installation abilities, please refer to your local authorized ORION dealer for assistance. Orion dealers are trained professionals dedicated to extracting the maximum performance out of your Orion system. If you decide to install this speaker system yourself, please read the entire section on sealed and vented enclosures before starting the installation.

FINDING SPEAKER MOUNTING LOCATIONS

Choosing the correct speaker locations will have the greatest effect on the sound quality of the system. Different considerations are needed when choosing the locations that best suit your needs. The locations must be large enough for the speakers to fit. Care is needed to ensure that the location you have chosen will not affect any of the mechanical or electrical operations of the vehicle.

Determining the best location for the speakers will depend on your cosmetic needs and your vehicle’s interior. Usually the woofers are installed in the trunk, rear seat, or rear of the vehicle..

2

© 2008 directed electronics—all rights reserved

Image 3
Contents Subwoofer Model Introduction Practice Safe Sound Table of ContentsFinding Speaker Mounting Locations InstallationWHAT’S in the BOX Tools of the TradeFeatures Wiring Configurations Series One Speaker dual 2 ohm voice coilsParallel-One Speaker dual 2 ohm voice coils Parallel One Speaker dual 4 ohm voice coils Figura Parallel Two Speaker dual 4 ohm voice coilsSeries/Parallel Two Speakers dual 2 ohm voice coils OhmSeries/Parallel Three Speakers dual 4 ohm voice coils OhmSeries/Parallel Three Speakers dual 2 ohm voice coils Figura Series/Parallel Four Speakers dual 4 ohm voice coilsFigura Abbildung Series/Parallel Four Speakers dual 2 ohm voice coilsAmplifiers One Speaker dual 2 ohm voice coils Amplifiers One Speaker dual 4 ohm voice coils Specifications Driver Physical DimensionRecommended Enclosures 21.4 23.0 Vas equivalent compliance, cu. ft XTR102 XTR104 XTR122 XTR124 XTR152 XTR154 Enclosure DetailsExplanation of Enclosure Specifications Box Properties Enclosure RecommendationsDescription Box Parameters Vents XTR102 & 104 Vented Enclosure RecommendationsXTR122 & 124 Sealed Enclosure Recommendations Box PropertiesXTR122 & 124 Vented Enclosure Recommendations XTR152 & 154 Sealed Enclosure Recommendations Driver Mounting Mounting FrontXTR152 & 154 Vented Enclosure Recommendations Français Choix DES Emplacements DE Montage DES HAUT- ParleursCaractéristiques Parallèle Un haut-parleur deux bobines mobiles de 4 ohms Configurations DE CâblageSérie Un haut-parleur deux bobines mobiles de 2 ohms Parallèle Un haut-parleur deux bobines mobiles de 2 ohmsVoir la à la Voir la à la Modèle/Référence XTR### Taille Paramètres Thiele/Small SpécificationsCaissons recommandés Spécifications sujettes à changement sans préavisEncombrement du haut-parleur Explication DES Caractéristiques Techniques DES Caissons Détails des enceintes Recommandations SUR LES EnceintesPropriétés du caisson Español InstalaciónUbicaciones DE Montaje DE LOS Altavoces Características En paralelo un altavoz dos bobinas acústicas de 4 Ω Configuraciones DE CableadoEn serie un altavoz dos bobinas acústicas de 2 Ω En paralelo un altavoz dos bobinas acústicas de 2 ΩVea la figura 8 en la página Negativa del amplificadorVea la figura 6 en la página Vea la figura 7 en la páginaAmplificadores un altavoz dos bobinas acústicas de 4 Ω Vea la figura 9 en la páginaVea la figura 10 en la página Amplificadores un altavoz dos bobinas acústicas de 2 ΩDimensiones físicas del excitador EspecificacionesModelo / Nº de pieza XTR### Tamaño Parámetros Thiele/Smal l Cajas recomendadas Especificaciones sujetas a cambio sin aviso previoExplicación DE LAS Especificaciones DE LAS Cajas Detalles de la caja Recomendaciones Para LA CajaPropiedades de la caja SO Platzieren SIE DIE Lautsprecher DeutschHöhepunkte Parallel Ein Lautsprecher Doppelte 4-Ohm-Schwingspulen SchaltkonfigurationenReihe Ein Lautsprecher Doppelte 2-Ohm-Schwingspulen Parallel Ein Lautsprecher Doppelte 2-Ohm-SchwingspulenSiehe Abbildung 6 auf Seite Siehe Abbildung 7 auf SeiteSiehe Abbildung 8 auf Seite Siehe Abbildung 9 auf Seite Siehe Abbildung 10 auf SeiteVerstärker Ein Lautsprecher Doppelte 2-Ohm-Schwingspulen Modell/Teilenummer XTR### Größe Thiele/Small-Parameter Technische DatenVerstärker Ein Lautsprecher Doppelte 4-Ohm-Schwingspulen Erklärung der Daten, Details siehe Seite 14 undEmpfohlene Gehäuse Abmessungen des TreibersErläuterung DER Gehäusedaten Gehäusedetails GehäuseempfehlungenGehäuseeigenschaften Installazione ItalianoIndividuazione DEI Punti DI Montaggio Degli Altoparlanti Caratteristiche Un diffusore in parallelo con due bobine mobili da 4 ohm Configurazioni DI CablaggioUn diffusore in serie con due bobine mobili da 2 ohm Un diffusore in parallelo con due bobine mobili da 2 ohmVedi Figura 8 a pagina Dell’amplificatoreVedi Figura 6 a pagina Vedi Figura 7 a paginaVedi Figura 10 a pagina Vedi Figura 9 a paginaPer i dati tecnici dettagliati vedere alle pagine 14 e Modello/Codice XTR### Dimensioni Parametri Thiele/SmallDimensioni fisiche del driver Dati TecniciCasse raccomandate Dati tecnici sono soggetti a modifica senza preavvisoSpiegazione DEI Dati Tecnici Della Cassa Dettagli della cassa Raccomandazioni PER LA CassaPropriet della cassa Português InstalaçãoDeterminação DOS Locais DE Instalação DOS ALTOS-FALANTES Características Paralela Um alto-falante duas bobinas de 4 ohm Configurações DE ConexãoEm série Um alto-falante duas bobinas de 2 ohm Paralela Um alto-falante duas bobinas de 2 ohmSérie-Paralela Dois alto-falantes duas bobinas de 2 ohm Série-Paralela Três alto-falantes duas bobinas de 4 ohmSérie-Paralela Três alto-falantes duas bobinas de 2 ohm Ver figura 10 na página Série-Paralela Quatro alto-falantes duas bobinas de 4 ohmVer figura 9 na página Série-Paralela Quatro alto-falantes duas bobinas de 2 ohmEspecificações Tradução das especificações, ver detalhes nas páginas 14 eDimensão física do alto-falante Caixas recomendadas Explicação DAS Especificações DAS Caixas Detalhes da caixa Recomendações Para CaixasPropriedades da caixa Warranty