Series/Parallel - Two Speakers (dual 2 ohm voice coils)
Note: Verify and ensure that the woofer wiring is connected as shown with the negative connection from the first woofer coil connected to the positive connection of the second woofer coil.
Two dual 2 ohm voice coil woofers with voice coils in series and then parallel the two series woofers results in a 2 ohm load to the amplifier.
- ohm2
- | - | - |
2 ohm | 2 ohm | 2 ohm |
+ | + | + | + |
Figure 6 | + |
Figura 6 |
|
Abbildung 6 | - |
1.Connect each woofer in series by connecting the negative (-) of the first coil to the positive (+) terminal of the second coil.
2.Wire the positive (+) terminal of the first coil on each woofer to the positive (+) terminal on the amplifier. Wire the negative (-) terminal of the second coil on each woofer to the negative (-) terminal on the amplifier.
© 2008 directed | 7 |