Epson TM-C100 manual Hand fed printing is not possible, Paper is not cut roll paper specification

Page 40

Note:

When using OPOS-X, the option setting is set automatically. Change only the feed setting. (Use the "SlpPaperBinNumber" properties.)

❏Change the driver "Feed setting" to "ASF."

❏Turn off the printer, and reconnect the cable of the ASF unit to the printer. Then turn on the printer again.

❏Check with "ASF Specification" on page A-7that the size of the paper you are using is appropriate for the product specification.

3.4.5Hand fed printing is not possible

If after following "Feeding and printing paper by hand" on page 3-4hand fed printing is not possible, try the following measures again. (For information on how to set the driver, see the driver manual.)

❏Set paper feed in the driver to "Hand feed."

❏If the roll paper holder is attached, remove it.

❏After checking that the PAPER LED flashes after the print command was sent from the driver, set the paper.

❏Check with "Hand Fed Paper Specifications" on page A-9that the size of the paper you are using is appropriate for the product specification.

3.4.6Eliminating excessive bottom margins (roll paper specification)

When using the APD, if you set the "Roll paper saving mode" in the driver, the printer cuts the paper when printing finishes, irrespective of the paper size settings, so that the bottom margin is not excessive. (For information on how to set the driver, see the driver manual.)

Note:

When using OPOS-X, any cut position can be programmed. Note that there is no "Roll paper saving mode."

3.4.7The paper is not cut (roll paper specification)

❏You can use a self-test (see "Self Test Procedure" on page 3-11)to check the operation of the printer. If the paper is not cut after self-testing, the printer may not be working properly. Have it serviced.

❏In the long print mode, the paper is not cut at a new page. Check the driver settings. (For information on how to set the driver, see the driver manual.)

Note:

When using OPOS-X, any cut position can be programmed. Note that there is no "Long print mode."

3-10Using the Printer

Rev. C

Image 40

Contents TM-C100 Technical Reference Guide Page Revision Information TM-C100 Technical Reference GuideKey to Symbols Important Safety InformationRev. C Iii Modular connectors Restriction of UseAbout This Manual Contents of the ManualAim of the Manual Related Software and Documents Related Software and DocumentsTM-C100 Technical Reference Guide Product OutlineViii Product Specification FeaturesPrinter types TM-C100 related products Standard Accessories2Product Outline Rev. C Ink cartridges ConsumablesRoll paper Standard size paper 4Product Outline Rev. CPart Names and Basic Operations Part names2Setup Rev. C Power switch Control panel4Setup Rev. C Cleaning switchSetup Procedure Printer Setup Installing options6Setup Rev. C Installing the ASF auto sheet feeder unitAttach the paper support Connecting the power unit 8Setup Rev. CInstalling the roll paper holder Connection procedureInstalling the ink cartridge Setup Rev. C Connecting the printer to the host PC / POS terminal Installing a Printer Driver in the Host PC / POS Terminal Install and SetupInstallation and setup Advanced Printer Driver APDStart Run CheckHealth and perform the device communication test Contents of the Epson OPOS-X ADK package Setup Rev. C With the auto sheet feeder ASF specification How to Set, Replace, and Print on the PaperHow to set and replace the paper With the roll paper specification 2Using the Printer Rev. CHow to install and replace paper Printing methodRev. C Using the Printer 4Using the Printer Rev. C Feeding and printing paper by handReplacing the Ink Cartridge 6Using the Printer Rev. C Maintenance Ink head cleaningUsing the switch on the printer Using the maintenance utility of the driver8Using the Printer Rev. C TroubleshootingFlashing LEDs Paper jam occurred Paper being printed does not come outPaper is not supplied from the ASF 10Using the Printer Rev. C Paper is not cut roll paper specificationHand fed printing is not possible FAQ Printing on long paper roll paper specificationMaking fine color adjustments such as color matching Self Test Procedure12Using the Printer Rev. C With the roll paper specificationFeeding paper by hand 14Using the Printer Rev. C Using OPOS-X Using the Windows Advanced Printer DriverBar Code Printing Precautions When Using OPOS-X Selecting the feed type ASF specificationPaper size FontsProduct Specifications of the TM-C100 Product Specifications2Product Specifications of the TM-C100 Rev. C Printing Specifications Approximate printing speedRoll Paper Specification Print area and cutter position Plain paper/special paperPlain borderless label paper ASF Specification Or lessPrint area For standard printingHand Fed Paper Specifications Or less Or more Feed directionExternal Dimensions and Weight Case SpecificationsColor Roll paper specification Outline drawingASF specification Control Method Windows Driver Epson Advanced Printer DriverEpson Advanced Printer Driver Outline Epson Advanced Printer Driver components2System Design Rev. C Epson Advanced Printer Driver support environmentEpson Opos ADK Outline Epson Opos ADK components4System Design Rev. C How to Obtain the DriverEpson Opos ADK support environment Page Seiko Epson Corporation