Epson TM-C100 manual Roll Paper Specification

[Bi: bidirectional printing]

[Uni: unidirectional printing]

Note:

1.Printing speed is with continuous printing without cleaning, auto-cutting, or paper feed or ejection.

2.Printing speed may be slower, depending on the data transmission speed, status receiving and so on.

A.3 Roll Paper Specification

Item	Specification
Autocutter	Cutting method:	Circular cutter
	Cutting type:	Full cut
	Minimum cut length: 15 mm
Roll paper holder	Supply method:		Axial
	Roll paper detection:		TOF/BOF sensor
	Paper near-end detection:		No
	Paper width selection:		Selectable from 45 mm to 105 mm
	Paper width detection:		No
	Roll paper holder detection:		Yes
Paper feed specifications	Paper feed type:		Friction feed
	Continuous paper feed speed: approximately53 mm/s
Paper specifications	Paper type:	Plain paper/special paper (special fine paper, special matte
		paper)/plain borderless label paper (scraps on both sides:
		width 1 mm)
	Form:	Roll paper
	Paper width:	45 to 105 mm
	Paper thickness:	0.06 to 0.23 mm
	Basic weight:	52.3 to 200 g/m2 (JIS P8124)
		(45 to 173 kg / 1,000 sheets / 788 × 1,091 mm)
	Outside diameter:	Maximum φ90 ± 1 mm
	Core:	Inside diameter 38 mm, outside diameter 44 mm (cannot be
		pasted with paper)
	Roll length:	Plain paper approximately 61 m
		Borderless label paper approximately 37 m
		Special fine paper approximately 40 m
		Special matte paper approximately 20 m
	Roll direction:	Top-side roll
	Holes and cutouts:	No holes or cutouts in the roll paper are permitted.
Mass	Roll paper specification: Approximately 2.0 kg
	ASF specification: Approximately 1.9 kg

Note:

Print quality may fall when printing immediately after installing the roll paper.

A-4Product Specifications of the TM-C100 Rev. C