Epson TM-C100 manual ASF Specification, Or less

Page 53

TM-C100 Technical Reference Guide

A.4 ASF Specification

Item	Specification

Cut sheet feeder specifications	Paper feed type:	Friction feed
	ASF unit detection: Detection by an optional connector
	Cut sheet detection: Detection by the TOF/BOF sensor

Paper specifications	Paper type:	Plain paper/special paper (special fine paper, special matte
		paper)/plain borderless label paper
	Paper size:	55 to 135 mm (width) × 85 to 210 mm (length)
	Paper thickness: 0.08 to 0.25 mm
	Basic weight:	64 to 218 g/m2 (JIS P8124)
		(55 to 188 kg / 1,000 sheets / 788 × 1,091 mm)

Feed specifications	Number of sheets set: Combined paper thickness 5.5 mm or less (including
		unevenness in the paper)
		20 sheets or less (with paper thickness of 0.25 mm)
		50 sheets or less (with paper thickness of 0.10 mm)

Mass	Approximately 1.9 kg

Note:

The paper must be flat, without curls or wrinkles (especially at the top edges). Otherwise, the paper may rub against the nozzles and be soiled.

When printing envelopes, curls or wrinkles may occur because of the sealing method, shape, material and so on, causing feed and printing errors; therefore prior evaluation is necessary.

In order for cut sheet detection to work properly, do not use paper that has cutouts or holes. However, as shown in the following figure, holes and cutouts of the "permissible hole and cutout size" in the "hole and cutout permissible area" are permissible.

hole and cutout permissible area

hole and cutout permissible size

11 or less

10 or more				feed direction

	8 or less

3 or more

[Unit: mm, all values are typical]

* Hole and cutout outside the "hole and cutout permissible area" are not

Cut sheet hole permissible area

Rev. C

Product Specifications of the TM-C100 A-7

Image 53

Contents TM-C100 Technical Reference Guide Page TM-C100 Technical Reference Guide Revision InformationRev. C Important Safety InformationKey to Symbols Iii Restriction of Use Modular connectorsAim of the Manual Contents of the ManualAbout This Manual Related Software and Documents Related Software and DocumentsProduct Outline TM-C100 Technical Reference GuideViii Printer types FeaturesProduct Specification 2Product Outline Rev. C Standard AccessoriesTM-C100 related products Roll paper ConsumablesInk cartridges 4Product Outline Rev. C Standard size paperPart names Part Names and Basic Operations2Setup Rev. C Control panel Power switchCleaning switch 4Setup Rev. CSetup Procedure Installing options Printer Setup6Setup Rev. C Installing the ASF auto sheet feeder unitAttach the paper support 8Setup Rev. C Connecting the power unitInstalling the roll paper holder Connection procedureInstalling the ink cartridge Setup Rev. C Connecting the printer to the host PC / POS terminal Install and Setup Installing a Printer Driver in the Host PC / POS TerminalInstallation and setup Advanced Printer Driver APDStart Run CheckHealth and perform the device communication test Contents of the Epson OPOS-X ADK package Setup Rev. C How to set and replace the paper How to Set, Replace, and Print on the PaperWith the auto sheet feeder ASF specification 2Using the Printer Rev. C With the roll paper specificationHow to install and replace paper Printing methodRev. C Using the Printer Feeding and printing paper by hand 4Using the Printer Rev. CReplacing the Ink Cartridge 6Using the Printer Rev. C Ink head cleaning MaintenanceUsing the switch on the printer Using the maintenance utility of the driverFlashing LEDs Troubleshooting8Using the Printer Rev. C Paper is not supplied from the ASF Paper being printed does not come outPaper jam occurred Hand fed printing is not possible Paper is not cut roll paper specification10Using the Printer Rev. C Printing on long paper roll paper specification FAQMaking fine color adjustments such as color matching Self Test ProcedureWith the roll paper specification 12Using the Printer Rev. CFeeding paper by hand 14Using the Printer Rev. C Bar Code Printing Using the Windows Advanced Printer DriverUsing OPOS-X Selecting the feed type ASF specification Precautions When Using OPOS-XPaper size FontsProduct Specifications Product Specifications of the TM-C1002Product Specifications of the TM-C100 Rev. C Approximate printing speed Printing SpecificationsRoll Paper Specification Plain paper/special paper Print area and cutter positionPlain borderless label paper Or less ASF SpecificationFor standard printing Print areaOr less Or more Feed direction Hand Fed Paper SpecificationsColor Case SpecificationsExternal Dimensions and Weight Outline drawing Roll paper specificationASF specification Windows Driver Epson Advanced Printer Driver Control MethodEpson Advanced Printer Driver Outline Epson Advanced Printer Driver componentsEpson Advanced Printer Driver support environment 2System Design Rev. CEpson Opos ADK components Epson Opos ADK OutlineEpson Opos ADK support environment How to Obtain the Driver4System Design Rev. C Page Seiko Epson Corporation