Epson T88II manual Using the Power Switch Cover, Self Test, Running the self test

Page 25

Using the Power Switch Cover

WARNING:

If an accident occurs when the power switch cover is attached, unplug the power supply cord from the outlet immediately. Continued usage may lead to fire or shock.

You can use the enclosed power switch cover to make sure that the power switch is not accidentally pressed. If you want to use this cover, install it as shown in the illustration below.

POWER

ERROR

OUTPAPER

FEED

Self Test

The self test lets you know if your printer is operating properly. It checks the control circuits, printer mechanisms, print quality, ROM version, and DIP switch settings.

This test is independent of any other equipment or software.

Running the self test

1.Make sure the printer is turned off and the printer covers are closed properly.

1-10Setting Up the Printer

Image 25

Contents TM-T88II Series Printer Parts and Labels VorsichtLabels Installing and Replacing Paper Setting Up the PrinterSolving Problems Quick ReferencePage For American Users FCC Compliance StatementIii Declaration of Conformity EMI and Safety Standards Applied About This Manual Setting Up and UsingReference Introduction FeaturesPrinting Application SoftwareOptions and Accessories Specified Thermal Roll Paper NTP080-80 Ordering Paper and SuppliesJujo Thermal Oy Finland Other Qualified Suppliers for Thermal PaperKanzaki Specialty Papers, Inc Using the Printer Xii Setting Up the Printer Setting Up the PrinterUnpacking Connecting the computer Connecting the Cables and Grounding the Printer2Setting Up the Printer Connecting the Drawer Anschließen der Lade 4Setting Up the PrinterGrounding the Printer Connecting the Power SupplyPage Installing or Replacing the Paper Roll 8Setting Up the Printer Tear off the paper as shown 10Setting Up the Printer Using the Power Switch CoverSelf Test Running the self testSelf test printing Please press the Paper Feed button 12Setting Up the Printer Adjustments and SettingsUsing the Printer Using the PrinterOperating the Control Panels Control PanelPanel lights 2Using the PrinterTroubleshooting TroubleshootingGeneral problems Printing problems2Troubleshooting Error light is off, but nothing is printedPrinting is poor Paper handling problems Cleaning the print headPaper is jammed inside the printer 4Troubleshooting Auto cutter is jammed Auto cutter problems6Troubleshooting Hexadecimal Dump Reference Information Printing SpecificationsReference Information 2Reference Information Line spacing default 4.23 mm 1/6Paper roll single-ply Size Paper SpecificationsCurrent Electrical CharacteristicsConsumption at Environmental Conditions TemperatureHumidity Setting the DIP Switches Dip Switch and Paper Near End SettingsDIP switch functions Serial interface specification2Dip Switch and Paper Near End Settings Print Density Selection Dip Switch and Paper Near End Settings A-34Dip Switch and Paper Near End Settings Parallel interface specificationDip Switch and Paper Near End Settings A-5 6Dip Switch and Paper Near End Settings Changing the DIP switch settingsDip Switch and Paper Near End Settings A-7 Adjusting the Paper Near End DetectorEpson Sales Subsidiaries B-1 Epson Sales Subsidiaries2EPSON Sales Subsidiaries