Epson T88II manual Reference Information, Printing Specifications

Page 37

Chapter 4

Reference Information

Printing Specifications

Printing method:

Dot density:

Printing direction:

Printing width:

Characters per line (default):

Character spacing (default):

Printing speed - High speed mode:

Printing speed - Low power comsumption mode:

Printing speed - when a ladder bar code is printed:

Thermal line printing

180 dpi × 180 dpi [the number of dots per 25.4 mm (1”)]

Unidirectional with friction feed

72 mm (2.83”), 512 dot positions

42 (Font A)

56 (Font B)

0.28mm (.01”) (2 dots) (Font A)

0.28mm (.01”) (2 dots) (Font B) Programmable by control command.

28.4lines/second maximum (1/6” feed, at 24V, 20° C, density level 2)

Approximately 120 mm/second maximum (approximately 4.72”/second maximum)

Speed is adjusted deepening on the applied voltage to the printer and head temperature conditions automatically.

Approximately 16.5 lines/second (1/6” feed)

Approximately 70 mm/second (approximately 2.76”/second)

Approximately 42 mm/ second (approximately 1.7’’/ second)

Reference Information 4-1

Image 37

Contents TM-T88II Series Printer Parts and Labels VorsichtLabels Installing and Replacing Paper Setting Up the PrinterSolving Problems Quick ReferencePage For American Users FCC Compliance StatementIii Declaration of Conformity EMI and Safety Standards Applied About This Manual Setting Up and UsingReference Introduction FeaturesPrinting Application SoftwareOptions and Accessories Specified Thermal Roll Paper NTP080-80 Ordering Paper and SuppliesJujo Thermal Oy Finland Other Qualified Suppliers for Thermal PaperKanzaki Specialty Papers, Inc Using the Printer Xii Setting Up the Printer Setting Up the PrinterUnpacking Connecting the computer Connecting the Cables and Grounding the Printer2Setting Up the Printer Connecting the Drawer Anschließen der Lade 4Setting Up the PrinterGrounding the Printer Connecting the Power SupplyPage Installing or Replacing the Paper Roll 8Setting Up the Printer Tear off the paper as shown 10Setting Up the Printer Using the Power Switch CoverSelf Test Running the self testSelf test printing Please press the Paper Feed button 12Setting Up the Printer Adjustments and SettingsUsing the Printer Using the PrinterOperating the Control Panels Control PanelPanel lights 2Using the PrinterTroubleshooting TroubleshootingGeneral problems Printing problems2Troubleshooting Error light is off, but nothing is printedPrinting is poor Paper handling problems Cleaning the print headPaper is jammed inside the printer 4Troubleshooting Auto cutter is jammed Auto cutter problems6Troubleshooting Hexadecimal Dump Reference Information Printing SpecificationsReference Information 2Reference Information Line spacing default 4.23 mm 1/6Paper roll single-ply Size Paper SpecificationsCurrent Electrical CharacteristicsConsumption at Environmental Conditions TemperatureHumidity Setting the DIP Switches Dip Switch and Paper Near End SettingsDIP switch functions Serial interface specification2Dip Switch and Paper Near End Settings Print Density Selection Dip Switch and Paper Near End Settings A-34Dip Switch and Paper Near End Settings Parallel interface specificationDip Switch and Paper Near End Settings A-5 6Dip Switch and Paper Near End Settings Changing the DIP switch settingsDip Switch and Paper Near End Settings A-7 Adjusting the Paper Near End DetectorEpson Sales Subsidiaries B-1 Epson Sales Subsidiaries2EPSON Sales Subsidiaries