The Copied Image is Improperly Sized
When Auto Fit Page is selected as the Reduce/Enlarge setting on the LCD panel and the border of the original document is white or very light, the size of the original may not be recognized correctly. This may cause the copied image to be improperly sized. To correct this, select Actual: 100% as the Reduce/Enlarge setting and then use the Zoom In/Out setting to adjust the size of the copied image.
Clearing the Jammed Paper
If paper is jammed inside this product, an error message appears on the LCD panel. You may be able to clear the jammed paper using the Control Panel.
When a message appears on the LCD panel to indicate the paper is jammed, press the x Color Copy button. The jammed paper is ejected.
If the jammed paper is not ejected:
1.Locate where the paper is jammed.
If the paper is jammed at the paper feeding position or the ejecting position, remove all of the paper by hand.
If the paper is jammed inside this product, press the P On button to turn off this product. Open the scanner unit, and then remove all of the paper inside by hand, including any torn pieces.