For Example
The default setting for the zero character is slashed. To change the setting to unslashed:
1.Press and hold SELECT while turning the printer on. The following line prints:
Printer Control Emulation Mode | IBM |
2.Press LINE FEED several times until the Symbol Sets group line appears:
Symbol Sets | Character Set | SetI |
3.Press FORM FEED repetitively until the Zero Character item line appears:
Symbol Sets | Zero Character | Slashed |
4.Press TOF SET once. The following line prints:
Symbol Sets | Zero Character | Unslashed |
5.Press PITCH and MODE together to save the setting and exit the Menu Mode.
45 • Operating Your Printer