Script | Not available | 10 cpi, 12cpi, 15 cpi, | |
17 cpi, 20 cpi, PS | |||
|
| ||
Orator | Not available | 10 cpi, 12cpi, 15 cpi, | |
17 cpi, 20 cpi, PS | |||
|
| ||
Not available | 10 cpi, 12cpi, 15 cpi, | ||
17 cpi, 20 cpi, PS | |||
|
|
*In Epson LQ mode, if you select Sans Serif, the printer uses the Gothic font.
The following table lists the print styles that are available in each printer control mode.
| Printer control mode |
|
Print style | BJ mode | Epson LQ mode |
Italic | No | Yes |
Emphasized | Yes (via ESC E sequence) | Yes (via ESC E sequence) |
Yes (via ESC [ @ sequence) | Yes (via ESC w sequence) | |
Yes (via ESC W sequence) | Yes (via ESC W sequence) | |
Slashed zero | Yes (via ESC [ K sequence) | No |
To select the printer control mode, use DIP switch 11. Refer to Chapter 8, Customizing the Printer, for information on DIP switches.
Setting Up WordPerfect for Your Printer
This section contains the procedures you perform to install the Bubble Jet Printer
1.Make sure your computer is turned on.
2.Make a backup copy of the diskette containing the Canon BJ- 200ex printer drivers for WordPerfect (if you have not already done so). This is disk 2 of the Windows Driver and Visual Guide.
3.At the
COPY A:WP51BJ2E.ALL C:\WP51
If you are using WordPerfect 6.0 and your directory is wp60, insert the driver diskette into Drive A and type:
COPY A:QP60BJ2E.ALL C:\WP60
4.Change to the WordPerfect directory and start WordPerfect by typing WP and pressing Enter.
5.At the document screen, press Shift + F7.