Canon 700 manual Using an FTP Client, Execute the following command

Page 39

2

Using a TCP/IP Network (Windows/UNIX)

MAC Address: Specify the MAC Address of the machine. Every second digit is separated by “-” (“:” for UNIX).

Input Example (Windows): arp -s 172.20.88.125 00-00-85-05-70-31

Input Example (UNIX): arp -s 172.20.88.125 00:00:85:05:70:31

NOTE

If you are using IBM-AIX, enter "arp -s ether <IP Address> <MAC Address>."

Note that in IBM-AIX language, the word “ether” means Ethernet.

3 Execute the applicable command below to set the IP address for the network board.

ping <IP Address> -l 479 (for Windows)

ping -s<IP Address> 479 (for Solaris 1.x/2.x)

ping <IP Address> 479 (for IBM-AIX)

ping <IP Address> 487 (for HP-UX)

ping -s 479 <IP Address> (for Red Hat Linux)

ping -s 480 <IP Address> (for Turbolinux)

IP Address: Specify the same IP address that you specified in step 2 above.

Input Example (Windows): ping 172.20.88.125 -l 479

NOTE

The term “-l” above is not “1” (one), but is the small letter of “L”.

To set the subnet mask and gateway address, you must use an FTP Client. For details on the procedure, proceed to step 1 in “Using an FTP Client,” on p. 2-43.

Using an FTP Client

You can use an FTP Client to specify the subnet mask and gateway address.

1 Start up the MS-DOS prompt or the Command prompt.

If you are using UNIX, display the Console screen, and then log on as a superuser.

2 Execute the following command.

ftp <machine’s IP address>

2-20Specifying Protocol Settings

Image 39
Contents Network Guide Laser Class 700 Series Network Guide PCL Printer Guide PCL Driver Guide Fax Driver Guide Manuals for the MachineBefore You Start How This Manual Is OrganizedContents Using a NetWare Network Windows Using a NetBIOS Network Windows 95/98/MeAppendix Overview of Network Setting Items How to Use This Manual Symbols Used in This ManualKeys Used in This Manual Displays Used in This Manual Abbreviations Used in This ManualClick OK Legal Notices TrademarksCopyright Disclaimers Before You Start System Requirements for Printing Printing Using a TCP/IP NetworkPrinting Using a NetWare Network System Environment RequirementsPrinting Using a NetBIOS Network Sample Windows Network Checking Your Network EnvironmentWithout Using a NetWare Server Sample Unix Network Using a Network with Different Types of Computers 8Checking Your Network Environment Using a TCP/IP Network Windows/UNIX2 Machine, in the PCL Printer Guide TCP/IP Network Setup ProceduresPreparation for Protocol Settings Specifying Protocol SettingsPress Set Specifying Network Settings from the Operation PanelPress or until 6.SYSTEM Settings appears Open all three one-touch speed dialing panelsIf you want to set Dhcp to ‘ON’ or ‘OFF’ If you want to set Bootp to ‘ON’ or ‘OFF’ If you want to set Rarp to ‘ON’ or ‘OFF’To specify the IP address To specify the subnet mask To specify the default gatewayEnter the DNS server address using the numeric keys Press or until 5.DNS Server ADD. appearsPress or until 6.DNS Dynamic SET appears Setting the Host Name Setting the Domain Name Data Registration Open all three one-touch speed dialing panels Press Stop to return to the Standby modePress or until 4.NETWORK Settings appears Press Data RegistrationCheck Using NetSpotPress or to scroll through the settings you want to Press or until 9.VIEW IP Address appearsSet up the web browser to accept cookies Using a Web Browser Remote UISelect Administrator Mode click OK Using a TCP/IP Network Windows/UNIX For LPD Banner Specify the LPD settingsSpecify the IP Address, Subnet Mask, and Gateway Address For LPD PrintIf you are using DNS, specify the DNS settings Using ARP/PING Commands Start up the MS-DOS prompt or the Command promptClick OK Execute the following command Using an FTP ClientEnter root as the user name Execute the following command to upload the config fileIf a password has been set for the machine If no password has been setConnecting to a TCP/IP Network Setting Up a Computer for PrintingWindows 95/98/Me Printer Connection Method LPD/RawOpen the printer’s Properties dialog box Specify the Spool settings Specify the port settings Windows 2000/XP Click OK to enable the settingsIf you are using Windows XP If you are using WindowsAdd Standard TCP/IP Printer Port Wizard starts 30Setting Up a Computer for Printing Click OK to enable the settings If necessary, install Microsoft TCP/IP Printing Check that Microsoft Windows TCP/IP Printing is installedOpen the printer’s Properties dialog box 34Setting Up a Computer for Printing Unix Example using SolarisExample using Red Hat Linux Example using TurbolinuxExample using HP-UX Printer Connection Method IPP Example using IBM-AIXEnter the URL of your printer Start the Add Printer WizardPrinter location settings are complete From the printer’s pop-up menu, display the Sharing sheet Print Server SettingsSpecify the Sharing settings Printer Management Using the Remote UIOperation Command 44Printer Management Using a NetWare Network Windows See NetWare Print Service Settings, on p NetWare Network Setup ProceduresNetWare Print Service Settings Print ServicesNDS Novell Directory Service and Bindery Mode Specifying Print Service Settings Using NetSpot Setup Using NetWare Administrator or PconsoleQueue Server Mode and Remote Printer Mode Enter the print server name in Print Server name Specify the Print Server name, Printer, and Queue settingsSet up a queue assign the print server to the queue Assign the printer to the print server Specify the printer name, type, and any remaining itemsAssign a queue to the printer 8NetWare Print Service Settings Protocol Settings 10Protocol Settings Specify the printer’s location Connecting to a NetWare NetworkInstalling the Printer Driver Printer’s Location Setting12Setting Up a Computer for Printing Using a NetBIOS Network Windows 95/98/Me NetBIOS Network Setup Procedures Connecting to a NetBIOS Network To set up the printer’s location, follow the procedure below Specify the Spool settings 6Setting Up a Computer for Printing Click OK to enable the settings 8Setting Up a Computer for Printing Appendix Guide TroubleshootingTroubleshooting 4Troubleshooting LPR Port Utility Deletion How to Uninstall SoftwareClick Yes NetBIOS/NetBEUI Port Monitor Utility DeletionSystem Settings Overview of Network Setting ItemsUsing the Operation Panel Using NetSpot, Remote UI, or FTP ClientSetting Description Default Common SettingsTcpframetype TCP/IP SettingsTcpprtcontlist Ncpburstmode NetWare SettingsNetBIOS Settings FTP Available Software for Network SettingsContainer object GlossaryBanding Buffer sizeEthernet CookieDaemon DNS server DomainGateway Address Internet Protocol IPIP address Log on NCP Burst ModeNDS Novell Directory Services NetBIOSProxy server Queue Server modePacket Signature ProtocolSnmp Simple Network Management Protocol Switching hubRIP Raster Image Processor Scope IDWAN Vector GraphicsIndex Index Nwadmin Appendix 120V
Related manuals
Manual 358 pages 5.87 Kb Manual 6 pages 32 Kb

700 specifications

The Canon 700, specifically the Canon EOS 700D, is a popular entry-level DSLR that successfully balances user-friendliness with advanced photographic technology. Launched in 2013, this camera serves as a compelling option for beginners and enthusiasts seeking an affordable yet feature-rich device.

One of the standout features of the Canon 700D is its 18-megapixel APS-C CMOS sensor, which offers impressive image quality and detail. This sensor, combined with the DIGIC 5 image processor, allows for quick shooting and great performance in various lighting conditions. The ISO range of 100-12800, expandable to 25600, ensures that users can capture clear and vibrant images, even in low-light environments.

The camera's 3-inch vari-angle touchscreen LCD is another highlight, enabling photographers to compose shots from a variety of angles, enhancing creativity. The touchscreen also streamlines menu navigation and settings adjustment, making it easier for new users to familiarize themselves with the camera's functionalities.

The Canon 700D features an 9-point autofocus system for focusing precision—ideal for both stills and video shooting. This system includes a single cross-type point at the center, which provides enhanced accuracy. Moreover, the camera excels in live view shooting, utilizing a Hybrid CMOS AF system for smooth focusing transitions when capturing moving subjects or shooting video.

Video capabilities are excellent, with the ability to record Full HD 1080p video at a variety of frame rates. Users can take advantage of manual exposure control during video recording, allowing for creative expression and technical expertise in videography.

Connectivity options are also present in the Canon 700D, including a built-in flash, external microphone input, and an HDMI output for easy sharing and playback. Although it lacks built-in Wi-Fi or Bluetooth, the camera can be paired with Wi-Fi-enabled devices via Eye-Fi cards for wireless image transfer.

The Canon 700D is designed with a comfortable grip and an intuitive layout, making it easy to hold for extended periods. This ergonomic design, paired with the camera's relatively lightweight body, makes it a great choice for travel photography.

In summary, the Canon 700D encapsulates technology and ease of use. Its combination of a robust sensor, versatile LCD, and solid video capabilities makes it an ideal option for beginners and those looking to step up their photography skills. Whether shooting landscapes, portraits, or video content, the Canon 700D delivers impressive results.