Canon IR1600 Copy Stack Bypass, Stack Bypass OFF, Setting the Standard Paper for the Stack Bypass

Page 71

4 Press or to select the stack bypass or paper drawer to be set for the Auto Paper Selection function, and press .

COPY

1.STACK BYPASS

5 Press	or	to select <ON> or <OFF> for the stack bypass and each paper drawer,
and press .

To make the stack bypass or paper drawer eligible for APS/ADS, press <ON>.

To make the stack bypass or paper drawer ineligible for APS/ADS, press <OFF>.

STACK BYPASS

OFF

NOTE

•If you select <ON> for the stack bypass, press or to select the paper size to be used on the stack bypass, and press .

STACK BYPASS SIZE

A3

6 Press (Stop) to return to the standby mode.

Setting the Standard Paper for the Stack Bypass

Set the standard paper size for the stack bypass if you always use the same size paper. You do not need to select the paper size each time you use the stack bypass.

IMPORTANT

•If you set the standard paper size for the stack bypass, you cannot select the paper size when you use the stack bypass.

NOTE

•The default setting is <OFF>.

3

Selecting and Storing Settings to Suit your Needs

Setting Specifications That Are Common to Each Function (Common Settings)

3-9

Image 71

Contents IR2000/iR1600 Reference Guide Reference Guide About the Manuals for the MachineAppendix How This Manual Is OrganizedTable of Contents Iii Main Power and Control Panel PowerSetting System Administrator Information System Settings Chapter Appendix Illustrations Used in This Manual How to Use This ManualSymbols Used in This Manual Buttons Used in This ManualVii Laser SafetyAdditional Information Viii International Energy Star-ProgramAbout Trademarks Installation Important Safety InstructionsHandling Power SupplyPage Xii Maintenance and InspectionsXiii ConsumablesOthers Xiv Operation of the Machine and Terms Used in This Manual Xvi Before You Start Using This Machine1 Avoid installing the machine in direct sunlight About the Installation Location and HandlingInstallation Precautions Avoid poorly ventilated locations Avoid exposing the machine to rapid changes in temperature Select a Safe Power Supply Moving the Machine Handling Precautions Before You Start Using This Machine Reserving Next Job While Current Job is in Operation REGISTRATION/SETTING 1.COMMON SettingsSetting Specifications to Suit Your Needs What the iR2000/1600 Series Machine Can DoDepartment ID Management Functions That Conserve Power ConsumptionEnergy Saver Mode Daily TimerExternal View Parts and Their FunctionsControl panel Front cover Unlock lever Lower left cover Stack bypass Internal ViewBefore You Control Panel Parts and FunctionsPaper Select button How to Turn On the Main Power Main Power and Control Panel PowerEnter DAC DAC PasswordPlease Wait Auto Paper TextIf the message Insert Control Card appears Insert Control CardEnergy Saver Button System Management Settings System Settings of This MachineAfter Turning the Power On Entering the Department ID and PasswordAfter Finishing Operations of the Machine Enter the Password, and pressWhen your operations are completed, press ID Platen glass Feeder when attachedPlacing Originals Before You Start Orientation of OriginalsLift up the feeder/platen glass cover Placing an Original on the Platen GlassPlace your original Gently lower the feeder/platen glass cover Placing Originals in the Optional Feeder ADF-J1 Adjust the slide guides to fit the size of the originals Envelope Making Prints Using the Stack BypassStandard Size Free SizeAdjust the slide guides to the size of the paper Stack Bypass Size Loading envelopes in the stack bypass Select Paper Plain Paper Stack Bypass Size StmtMulti-function Operation Labels *3 Envelope Available Paper StockLGL 38Available Paper Stock Checking Job2 Copy Status Flow of Checking/Canceling OperationsPress Stop to return to the standby mode Stop KEY Pressed Press OK KEY Canceling a JobCancel COPYING? YES Canceling with StopPress or To scroll through the job list Canceling from the Monitor ScreenIf there are multiple jobs Press to select YES Press to return to the standby modePress C Clear Checking Job Selecting and Storing Settings To Suit your Needs3 Selecting and Storing Settings to Suit your Needs Additional Functions Settings TableCopy Settings Print Lists Press Additional Functions Setting Specifications That Are Common toPress or to select 1.COMMON SETTINGS, and press Volume Common Settings 1.VOLUME ControlVolume Control 1.KEYPAD Volume Keypad VolumePress or to select 2.ESS Power LEVEL, and press Common Settings 2.ESS Power LevelESS Power Level LOW Setting the Power Consumption in Energy Saver ModePress or to select 1.COPY or 2.REPORT, and press Common Settings 3.DRAWER EligibltyDrawer Eligiblty 1.COPY Press or to select 3.DRAWER ELIGIBLTY, and pressStack Bypass OFF Setting the Standard Paper for the Stack BypassCopy Stack Bypass Press or to select on or OFF, and press Common Settings 4.USE Stack BypassUSE Stack Bypass Press or to select 4.USE Stack BYPASS, and pressPress or to select 5.SELECT PAPER, and press Common Settings 5.SELECT PaperSetting the Paper Type for the Drawer Setting the Rotate PrintingPress or to select 6.ROTATE PRINT, and press Common Settings 6.ROTATE PrintSetting a Dedicated Tray for Each Function Rotate PrintCopy USE Common Settings 7.TRAY SettingsTray Settings 1.TRAY a Tray a 1.COPYPress or to select 8.DISPLAY LANGUAGE, and press Common Settings 8.DISPLAY LanguageDisplay Language English Selecting the Display LanguageSetting the Current Date and Time Setting the Timer Timer SettingsREGISTRATION/SETTING 3.TIMER Settings Timer Settings 1.DATE/TIME SettingPress Timer Settings Auto ClearSetting the Auto Clear Press or to select the desired time period, and press Auto Clear Time 2MINPress or to select 2.AUTO CLEAR, and press Press or to select 3.ENERGY SAVER, and press Timer Settings 3.ENERGY SaverSetting the Energy Saver Mode Energy Saver OFFEnergy SVR Time 15MIN Timer Settings 4.DAILY Timer SETSetting the Daily Timer Press or to select 4.DAILY Timer SET, and pressPress or to select the day of the week, and press Daily Timer SET 1.SUNSetting the Date Format SUNPress or to select the desired date format, and press Timer Settings Date SetupDate Setup DD/MM Yyyy Press or to select 5.DATE SET UP, and pressPrinting the User’s Data List REGISTRATION/SETTING 6.PRINT ListsPrinting Reports Print Lists Print Lists 1.USER DataPrinting the Department ID Management List Print Lists 3.CANCEL ReportCanceling Printing of Reports Print Lists 2.DEPT. Info List24Printing Reports Print Lists System Management Settings Press or to select 4.SYSTEM SETTINGS, and press Setting System Administrator InformationREGISTRATION/SETTING 4.SYSTEM Settings Setting the System Administrator IDPress or to select 1.SYS. ADMIN. ID, and press System Settings 1.SYS. ADMIN. InfoSYS. ADMIN. Info 1.SYS. ADMIN. ID Press or to select 1.SYS. ADMIN. INFO, and pressPress or to select 2.SYSTEM PASSWORD, and press SYS. ADMIN. Info 2.SYSTEM PasswordSystem Password Setting the System PasswordSetting the Use of Department ID Management Setting the Department ID ManagementPress or to select 2.DEPT. ID MANAGEMNT, and press System Settings 2.DEPT.ID ManagemntDEPT.ID Managemnt OFF DEPT. ID Entry Setting the Department ID Management InformationDEPT.ID Managemnt DEPT.ID Managemnt 1.DEPT. ID EntryCopy Limits DAC Setup 1.PASSWORDPassword DAC Setup 2.COPY LimitsPress or to select 2.COUNT MANAGEMENT, and press DEPT.ID Managemnt 2.COUNT ManagementCount Management 1.COUNT Information Checking the Counter InformationPress or to select 3.RESTRICTIONS, and press DEPT.ID Managemnt 3.RESTRICTIONSRestrictions 1.PRINT Limits Restricting the Operation by Department IDPress or to select 4.PRINT with no ID, and press Print LimitsDEPT.ID Managemnt 4.PRINT with no ID Print with no ID Routine Maintenance5 Loading Paper in the Paper Drawers Loading PaperSupply REC. Paper Loading Paper Routine Maintenance Adjusting a Paper Drawer to Hold a Different Paper Size Pull out the paper drawer, and remove all the loaded paper Routine Maintenance STM LTR LTR B5R LDR Routine Maintenance Open the front cover Replacing the Toner CartridgeReplace Toner Open the stack bypass Pull out the left cover MaintenanceRoutine Routine Maintenance Close the left cover Turn the toner cartridge to the direction of the arrowClose the front cover Close the stack bypassReplace the Drum Replacing the Drum CartridgeRelease the blue unlock lever to its horizontal position 18Replacing the Drum Cartridge Routine Maintenance 20Replacing the Drum Cartridge Lock the blue unlock lever to its vertical positionClose the stack bypass Close the front cover Cleaning the Platen Glass/Rear Side of Platen Glass Cover Routine CleaningOpen the feeder cover Cleaning the FeederClose the feeder cover Close the feeder Press or to select 5.ADJUST/CLEAN, and press REGISTRATION/SETTING ADJUST/CLEANADJUST/CLEAN 1.ROLLER Cleaning Cleaning the RollerPress or to select 2.CLEAN Paper PRT, and press Roller Cleaning 2.CLEAN Paper PRTWhen you press , the machine starts cleaning the roller Roller Cleaning 1.START CleaningPaper Stock ConsumablesDrum Cartridge Toner CartridgePaper Cassette-W1 Staple Cartridge Troubleshooting6 REC. Paper JAM Open the Front Cover Display Shown When There Is a Paper JamClearing Paper Jams On p Open the stack bypass REC. Paper JAMClearing Paper Jams in the Left Cover and the Fixing Unit Open the front cover of the main unitPush down the green fixing lever over the toner cartridge Turn the green dial in the direction of the arrowClose the left cover Troubleshooting Open the lower left side cover of the main unit Clearing Paper Jams in the Lower Left Side CoverTroubleshooting 10Clearing Paper Jams Clearing Paper Jams in the Stack Bypass Open the feeder When the Copied Output Using the Feeder Becomes DirtyWhen the Copied Output Using the Feeder Becomes Dirty When a Error Code Between E500 and E585 Is Displayed Press or to select 1.ON or 2.OFF, and press ADJUST/CLEAN 2.USE STAPLE/SHIFTUSE STAPLE/SHIFT Press or to select 2.USE STAPLE/SHIFT, and pressSelf-diagnostic Display List of Error MessagesIncorrect Paper Size Please Wait Toner Empty Calling Your Local Authorized Canon Dealer Service Call MessageService Call Message 22Service Call Message Handling Options7 Handling Options System ConfigurationParts and Their Functions Feeder ADF-J1Open the upper cover of the feeder Check DocumentClearing Paper Jams in the Feeder Close the upper cover of the feeder Remove any jammed originalTurn the green knob and remove any jammed original 6Feeder ADF-J1 Front cover Finisher-L1Finishing Functions Collate ModeStaple Mode ABC Offset ModeClearing Paper Jams in the Finisher-L1 Open the Front Cover REC. Paper JAMIf you see the jammed paper, remove it Holding the green knob, lift the inner guide Close the upper left cover Remove any jammed paper under the inner guide14Finisher-L1 Close the front cover Replacing the Staple Cartridge in the Stapler Unit-K1 Load StaplesClose the front cover of the finisher Insert the new staple cartridgeRemoving Jammed Staples from the Stapler Unit-K1 Handling Options Push the staple cartridge back firmly into the finisher Inner 2-Way Tray-B1 Collate Function Tray FunctionsClearing Paper Jams in the Inner 2-Way Tray-B1 Handling Options 24Inner 2-Way Tray-B1 Close the left cover 26Inner 2-Way Tray-B1 Card Reader Operations Before Using CopyAfter you finish using the machine, remove the control card Operations After Using CopyCassette Feeding Module-G1 Cassette Feeding ModuleCassette Feeding Module-F1 Cassette Feeding Module-H1 Appendix8 Department ID List Report SamplesUser’s Data List Main Unit SpecificationsWhen main power is turned on approx seconds Feeder ADF-J1 Inner 2-way Tray-B1 Finisher-L1Card Reader Index Feeder Index Appendix System Settings

Related manuals

Manual 70 pages 20.25 Kb