INC CUT2 COUNT?
Same as INC CUT1 COUNT? but effects path #2 on a dual path printer. (Does not apply)
DEC CUT2 COUNT?
Same as DEC CUT1 COUNT? but effects path #2 on a dual path printer. (Does not apply)
2-SIDED PRINTER?
Only used with 2S ticket printers.
Your choices are YES (Enabled) or NO (Disabled). NO is factory default.
PARK TICKET?
Reverse the ticket to the print position after the last ticket in a group has been printed. Please consult your Programming Guide. Your choices are YES (Enabled) or NO (Disabled). NO is factory default.
TICKET MODE?
Defines how the printer will treat multiple tickets. Please consult your Programming Guide. Your choices are SINGLE or MULTIPLE. MULTIPLE is factory default.
PRINT MODE?
Defines the automatic ticket length calculation feature.
THERMAL The printer will feed out and then retract a ticket during this measurement.
(factory default)
RIBBON The printer will feed out one blank ticket. This mode is used for label stock to prevent peeling.
PRINT INTENSITY?
Controls the darkness of ticket print out.
Here are the following choices:
LIGHT
MED LIGHT
NORMAL
MED DARK SHORT HEAD LIFE
(factory default)
SKI MODE?
Enables the operator to set an unprintable area on the first .50” of a ticket.
This is ideally used for label stock. Your choices are YES (Enabled) or NO (Disabled).
NO is factory default
13