FLASH ACK MODE?
Enables or disables an ACK being sent back to the host after a flash operation. Your choices are YES (Enabled) or NO (Disabled). NO is factory default.
SOFTWARE BUSY?
Defines if the printer will go busy after each byte is received. Your choices are YES (Enabled) or NO (Disabled). NO is factory default.
BI-DIRECTIONAL?
Enables or disables the
TEST TICKET?
This item is used to select various FGL test ticket formats, it has been redefined for NAV Canada and should not be changed. Please refer to the first menu item “TEST TICKET TYPE?”.
BASEBALL MODE?
Defines the type of software emulation protocol for certain Baseball teams in the US.
This feature is set at the factory and should not be changed. NO is factory
default
USB?
Only used for printer with USB interface connector.
Your choices are YES (Enabled) or NO (Disabled). NO is factory default.
MAGNETICS?
Defines if a printer is set up for magnetics. Your choices are YES (Enabled) or NO (Disabled). This feature is set at the factory and should not be changed. NO is
factory default.
EXIT AND SAVE !
Will save any changes made to the above menu options.
If you wish to save the new value then press TEST, if not press MENU.
JUST EXIT?
Will exit the menu options without saving any changes.
If you with to exit without saving the new value then press TEST, if not press MENU.
14