Boca Research FSP 44, FSP 46, FSP 42 technical manual Unpacking the Printer, Boca

Page 8

2.0 Unpacking the Printer

The printer is shipped in a ruggedized container. Please save packing material for future use. Remove the printer (see figure 1) and accessories from the box and inspect for obvious damage. If damage is noticed, please report it immediately to

BOCA.	boca@bocasystems.com
Tel: (561) 206-0100 Fax: (561) 998-9609

The following items should be in the box:

a)Flight Strip Printer

b)Hopper (Optional)

c)AC power cord

Figure 1 - Packaging

Image 8

Contents FSP 42/44/46 Flight Strip Printer Boca SYSTEMS, INC Table of Contents Table of Figures and Appendices FCC Notice Warranty Information Introduction Unpacking the Printer BocaTour of Your Printer Control Panel LCD Output Slot Hopper Mounting HolesCutter Assembly MAY Vary Page Configuration MAY Vary Installation Loading Flight StripsThermal Standard Configuration Menu TestBaud RATE? Test Ticket TYPE?Print Head TYPE? Diagnostic MODE? Status ENABLED?MINI/MICRO? Print SPEED?Default Setting Special HEAD?Path TYPE? Buffer MODE?INC CUT2 COUNT? DEC CUT2 COUNT?Sided PRINTER? Park TICKET?Flash ACK MODE? Software BUSY?BI-DIRECTIONAL? Test TICKET?This Section has Been Removed Control Panel Indicator Error No DescriptionInterface Pinouts Serial PinoutsTypical RS232 Pin Connections Parallel PinoutsThermal Paper Theory & Specification Optical Device see figure Maintenance and AdjustmentsPaper Guide and Print Head Assembly Ticket Load Switch Optical DeviceThermal Print Head Rubber Drive Roller PlatenPrint Head removal Logic Board Cutter AssemblyGeneral Cleaning Parts List Troubleshooting Guide No Print OUT Printer Skips Tickets While PrintingPrinter Skips Tickets and Dies Ticket JAM Entering the Cutter Area

2.0 Unpacking the Printer

BOCA.

Figure 1 - Packaging