SRP-F310/312
Figure 3-9 USB Cable
3-5-4(d) Construction
Raw materials used in the fabrication of this cable must be of such quality that the fabricated cable is capable of meeting or exceeding the mechanical and electrical performance criteria of the most current USB Specification revision and all applicable domestic and international safety/testing agency requirements; e.g., UL, CSA, BSA, NEC, etc., for electronic signaling and power distribution cables in its category.
American Wire | Nominal Conductor | Stranded Tinned | |
Gauge (AWG) | Outer Diameter | Conductors | |
28 | 0.381 mm (0.015) | 7 x 36 | |
0.406 mm (0.016) | 19 x 40 | ||
| |||
26 | 0.483 mm (0.019) | 7 x 34 | |
0.508 mm (0.020) | 19 x 38 | ||
| |||
24 | 0.610 mm (0.024) | 7 x 32 | |
0.610 mm (0.024) | 19 x 36 | ||
| |||
22 | 0.762 mm (0.030) | 7 x 30 | |
0.787 mm (0.031) | 19 x 34 | ||
| |||
20 | 0.890 mm (0.035) | 7 x 28 | |
0.931 mm (0.037) | 19 x 32 | ||
|
Table
Rev. 1.00 | - 28 - |