
SRP-F310/312
1.Remove the ①four screws.
2.Separate the ②BRACKET MAIN From the FRAME MAIN
3.Remove the ③screw.
4.Separate the ④COVER OPEN S/W From the FRAME MAIN
5.Remove the ⑤screw.
6.Separate the ⑥PCB FEED
From the FRAME MAIN
7.Remove the ⑦screw.
8.Separate the ⑧PCB
1.Remove the ①screw, And separate the NEAR END SENSOR from the BRACKET MAIN.\
2.Remover the ⑥SCREW.
3.Separate the ③KNOB
②HOUSING P-END
4.Separate the ⑤PCB SENSOR from the ④HOUSING SENSOR
5.Remover the
6.Separate the ⑦two GEARS
from the BRACKET MAIN
7. Remove the ⑨two SCREWS
8.Separate the ⑩MOTOR from the BRACKET MAIN
9.Remove the ⑪SCREW.
10.Separate the ⑫
11.Remover the⑬ WASHER
12.Separate the ⑭SHAFT FIX
13.Remover the ⑮WASHER
14.Separate the ASSY ROLLER PLATEN from the BRACKET MAIN
15.Remover the BUSHING
17. Remover the GEAR PLATEN
Rev. 1.00 | - 52 - |