SRP-F310/312
1.Remove the ①two screws.
2.Separate the ②CASE UPPER from the ASSY HOUSING.
3.Separate the ③COVER
4.Remove the ④screw.
5.Separate the ⑤COVER HINGE from the ASSY HOUSING.
1.Remove the ①four screws.
2.Separate the ②BRACKET HOUSING from the ASSY HOUSING
3.Separate the ⑥two WASHER
from the ⑤SHAFT HINGE
4.Separate the ⑤SHAFT HINGE and ③BRACKET HOOK and ④SPRING from the ②BRACKET HOUSING
5.Remove the ⑧screw.
6.Separate the ⑨PCB LED
from the ⑦COVER HOUSING
7.Remove the ⑫⑬FFC,FPC from the ⑪PCB TPH
8.Remove the ⑩two screws.
9.Separate the ⑪PCB TPH from the ⑦COVER HOUSING
Rev. 1.00 | - 49 - |