Using the PS-Utility | Airlink101 APSUSB2 instruction

8. Using the PS-Utility

PS-Utilityis a user-friendly program that allows you to configure some basic functions of the Print Server such as performing a factory reset or updating the firmware. To access the complete management features of the Print Server, you’ll need to use the Web Configuration Utility, which is described in the next section.

Note: If you haven’t installed PS-Utilityyet, please follow the installation instructions as described in Section 3, Installing PS-Utility.

You can start PS-Utility by going to Start, (All) Programs, PS Utility, PS Utility v2.00.

Device Name: Lists any Print Server that is connected on your network.

Information: Displays the basic information for the selected Print Server.

Discover Device: Click on this button to automatically search for any Print Server that is connected to your network.

Change IP Address: Click on this button to change the IP Address and other TCP/IP settings for the Print Server.

Update Firmware: Click on this button to update the Print Server’s firmware.

Note: You must download the updated firmware from www.airlink101.com first.

Show Web Setup: Click on this button to display the Web Configuration Utility.

Factory Reset: Click on this button to reset the Print Server back to factory settings.

About: Click on this button to display the version number of the PS-Utility.

Close: Click on this button to close PS-Utility.