Airlink101 APSUSB2 manual Tools, Print Test

Page 23

9.3 Tools

Click on Tools to display the Tools page.

Print Test

The Print Test page allows you to perform a low-level print test, which bypasses the operating system layer. The test page is sent directly from the Print Server to the printer. This allows you to test the compatibility of your printer with the Print Server.

Select the port that the printer is connected to and click on the Test button.

Your printer should print out a test page. If not, verify that the printer is powered on and all cables are securely connected and try again. If the printer still fails to print a test page, please check the printer compatibility list on our web site at www.airlink101.com for a list of compatible printers. If your printer is not on the list, it may not be compatible with the Print Server.

22

Image 23

Contents Port USB Print Server Model # APSUSB2 User’s Manual Table of Contents System Requirements Package ContentsIntroduction Connecting the Print Server Hardware InstallationInstalling PS Utility Click Next Click Yes Click Finish Configuring Network Setting Click OK Verifying Network Connection Running PS Wizard Click Next Page Page Performing Operating System Print Test Click on Start, Settings, Printers and FaxesPage Using the PS-Utility Click on the Show Web Setup button in PS-Utility Using the Web Configuration UtilityPrinter Status ManagementSystem Status Server Device ConfigurationTCP/IP Protocol NetBEUI Protocol AppleTalk Print Test ToolsAbout ResetFactory Reset HelpPrinting in Mac OS Using RendezvousPage Page For Mac OS Setting AppleTalk/LPR PrintingPage Page To set up the Print Server for AppleTalk printing To print from Mac OS Client Workstations Page Standard Snmp Product SpecificationsNetwork Data Transfer Rate 10/100 Mbps Technical Support Appendix

Related manuals

Manual 14 pages 62.72 Kb