Airlink101 APSUSB2 manual Setting AppleTalk/LPR Printing, For Mac OS

Page 28

10.2 Setting AppleTalk/LPR Printing

If you want to use AppleTalk or LPR printing instead of Rendezvous, Follow the instructions below.

For Mac OS X

Step 1 After attaching the Print Server to your network, change the IP Address of your Macintosh computer in order to access the Print Server’s Web Configuration Utility. The default IP Address of the Print Server is 192.168.1.254. Change your IP Address to 192.168.1.x, where x is any number between 2 and 200.

Step 2 Open the System Preference window and click Network. In the Network window, select the AppleTalk tab and check the Make AppleTalk Active check box.

27

Image 28

Contents Port USB Print Server Model # APSUSB2 User’s Manual Table of Contents Introduction Package ContentsSystem Requirements Hardware Installation Connecting the Print ServerInstalling PS Utility Click Next Click Yes Click Finish Configuring Network Setting Click OK Verifying Network Connection Running PS Wizard Click Next Page Page Click on Start, Settings, Printers and Faxes Performing Operating System Print TestPage Using the PS-Utility Using the Web Configuration Utility Click on the Show Web Setup button in PS-UtilitySystem Status ManagementPrinter Status Configuration Server DeviceTCP/IP Protocol NetBEUI Protocol AppleTalk Tools Print TestReset Factory ResetHelp AboutUsing Rendezvous Printing in Mac OSPage Page Setting AppleTalk/LPR Printing For Mac OSPage Page To set up the Print Server for AppleTalk printing To print from Mac OS Client Workstations Page Network Data Transfer Rate 10/100 Mbps Product SpecificationsStandard Snmp Appendix Technical Support

Related manuals

Manual 14 pages 62.72 Kb