Airlink101 APSUSB2 manual TCP/IP Protocol

Page 20

TCP/IP Protocol

The TCP/IP Protocol page allows you to configure the TCP/IP setting of the Print Server.

IP Address: Assign an IP address for the Print Server or keep the default.

Subnet Mask: Assign a Subnet Mask for the Print Server or keep the default.

Default Gateway: Assign a Default Gateway for the Print Server or keep the default.

IP Assignment: Choose to manually assign an IP address for the Print Server (strongly recommended), or to obtain an IP address automatically using RARP, BOOTP, or DHCP.

SNMP: You can set up to 3 SNMP Communities.

Click Save to save and activate any configuration changes. Click Cancel to cancel the changes.

19

Image 20

Contents Port USB Print Server Model # APSUSB2 User’s Manual Table of Contents System Requirements Package ContentsIntroduction Hardware Installation Connecting the Print ServerInstalling PS Utility Click Next Click Yes Click Finish Configuring Network Setting Click OK Verifying Network Connection Running PS Wizard Click Next Page Page Click on Start, Settings, Printers and Faxes Performing Operating System Print TestPage Using the PS-Utility Using the Web Configuration Utility Click on the Show Web Setup button in PS-UtilityPrinter Status ManagementSystem Status Configuration Server DeviceTCP/IP Protocol NetBEUI Protocol AppleTalk Tools Print TestReset Factory ResetHelp AboutUsing Rendezvous Printing in Mac OSPage Page Setting AppleTalk/LPR Printing For Mac OSPage Page To set up the Print Server for AppleTalk printing To print from Mac OS Client Workstations Page Standard Snmp Product SpecificationsNetwork Data Transfer Rate 10/100 Mbps Appendix Technical Support

Related manuals

Manual 14 pages 62.72 Kb