Airlink101 APSUSB2 manual For Mac OS, To set up the Print Server for AppleTalk printing

Page 31

For Mac OS 9

If you use Mac OS 9, you can use the AppleTalk network protocol using the EtherTalk transport or a proprietary low-speed LocalTalk transport. Your Print Server can be used for network printing to PostScript printers. You can print from any Mac OS computer connected to your Ethernet network either directly using an EtherTalk connection or indirectly through a LocalTalk-to-EtherTalk router.

To set up the Print Server for AppleTalk printing:

Step 1 Please confirm that the AppleTalk protocol is enabled in your Macintosh computer.

Step 2 Change the IP Address on one of the computers within your network to 192.168.1.x (where x is any number between 2 - 200).

Step 3 Type the Print Server’s IP address into the address field of your web browser. (Default IP Address is 192.168.1.254).

Step 4 Click on Configuration and go to the AppleTalk Protocol page. If your AppleTalk network is divided into AppleTalk zones, you have to specify which zone the Print Server should be in. You should locate the Print Server in the same zone as most of the users who will be using it. If your network is not divided into zones, it should contain a single asterisk “*”.

30

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Port USB Print Server Model # APSUSB2 User’s Manual Table of Contents Introduction Package ContentsSystem Requirements Connecting the Print Server Hardware InstallationInstalling PS Utility Click Next Click Yes Click Finish Configuring Network Setting Click OK Verifying Network Connection Running PS Wizard Click Next Page Page Performing Operating System Print Test Click on Start, Settings, Printers and FaxesPage Using the PS-Utility Click on the Show Web Setup button in PS-Utility Using the Web Configuration UtilitySystem Status ManagementPrinter Status Server Device ConfigurationTCP/IP Protocol NetBEUI Protocol AppleTalk Print Test ToolsAbout ResetFactory Reset HelpPrinting in Mac OS Using RendezvousPage Page For Mac OS Setting AppleTalk/LPR PrintingPage Page To set up the Print Server for AppleTalk printing To print from Mac OS Client Workstations Page Network Data Transfer Rate 10/100 Mbps Product SpecificationsStandard Snmp Technical Support Appendix
Related manuals
Manual 14 pages 62.72 Kb
Top Page Image Contents