Problem |
| Probable Cause |
| Corrective Action |
|
|
|
|
|
Front panel does not | 1) | One or more PC board(s) | 1) | Power off and remove the power cord from the |
complete diagnostics test 2. | unplugged from the Mother | AC entry. Remove the back cover and reseat the | ||
| Board. | offending board. | ||
|
|
|
|
|
Machine does not receive | 1) | Serial communications cable | 1) | Check and secure both ends of the serial cable |
batches. | loose or unconnected. | with the thumbscrews. | ||
|
|
|
|
|
| 2) | Machine not powered on or has | 2) | Power machine on and wait until machine |
| not completed diagnostics tests. | displays "Ready for batches". | ||
|
|
| data. | |
|
|
|
|
|
3) Data sent to wrong printer.
3)In PCMate change to the printer the data is intended to be sent.
4) | Configuration incorrect in | 4) | Re configure PCMate for AVERY DENNISON |
PCMate. | PCL printer as per your PCMate manual. | ||
|
|
|
|
5) | Faulty Thermal Control Board. | 5) | Replace Thermal Control Board. |
|
|
|
|
6) | Jumpers not configured | 6) | Contact AVERY DENNISON Service. |
correctly.
User Manual Model 676 LOKPRINT® | Electrical Trouble Shooting • 41 |