C)Using the left (<YES) or right (NO>) arrow key set the HEAD CATEGORY as called out in the PRINTHEAD CATEGORY CHART below.
D)Press the ENTER key to enter the value. The printer must be turned off and back on for the change to take effect.
PRINTHEAD CATEGORY CHART
MEAN | PRINTHEAD |
RESISTANCE | CATEGORY |
obtained from | entered in front panel |
printhead label | for print station |
| containing head |
1190 – 1243 | 1 |
1244 - 1295 | 2 |
1296 – 1348 | 3 |
1349 - 1400 | 4 |
1401 – 1453 | 5 |
1454 - 1505 | 6 |
1506 – 1558 | 7 |
1559 – 1610 | 8 |
13)As a final test of the print head installation, run a test pattern to check the print quality. You should observe an even grid of chevrons. If you do not see such a grid, make sure both the front and the back printheads are moved all the way to the right.
38 • Maintenance | User Manual Model 676 LOKPRINT® |