Axis Communications 660 Queue-based NetWare Printing IPX, Connecting additional print queues

Page 14

AXIS 560/660 User’s Guide

Setup for NetWare

13

 

 

 

Queue-based NetWare Printing (IPX)

AXIS NetPilot is the recommended tool you should use when you are installing the AXIS 560/660 in the NetWare (IPX) environment. Install the AXIS NetPilot software if you have not already done so. It is supplied on the AXIS Online CD and can also be downloaded from the Axis WWW home page on http://www.axis.com/.

Note:

The AXIS NetPilot software must be installed on a Windows platform running a NetWare client.

Follow the instructions detailed below to install your AXIS 560/660 using the AXIS NetPilot Installation Wizard:

1.Start AXIS NetPilot by double-clicking the AXIS NetPilot icon. The icon is located in the folder where AXIS NetPilot was installed.

2.Locate the AXIS 560/660 in the ‘New Axis Units’ folder. Select it and click the Install button on the AXIS NetPilot toolbar. If your network is large, it could take a few seconds before the print server appears in the folder.

3.Choose the with Installation Wizard option and click OK. The Installation Wizard will then guide you through the installation process.Should you require assistance with any of the operations click the Help icon and follow the instructions provided in the Help window.

4.After you have completed the installation, you must use the Add printer Wizard to install the printer on your client. When installing, choose Network Printer and browse to the queue you have just created. Alternatively, choose Local Printer and select the queue you have just captured.

5.When you have completed the instructions on the screen you are ready to print in your NetWare environment.

Connecting additional print queues

Follow the instructions below to enhance your installation by adding extra print queues:

1.Select the Network Print Server to be set up by clicking its icon.

2.Choose Network from the Setup menu or click the Network button on the toolbar.

3.Select the NetWare tab, select the printer port and click the Connect... button.

4.A new window opens that allows you to create new print queues and connect print queues to the AXIS 560/660.

NetWare

Page 13 Page 15
Image 14
Page 13 Page 15
Contents I S 5 6 0 / 6 6 E r s G u i d e v 3 Management and Configuration Read me FirstSafety notices Table of Contents Axis official home IntroductionAxis Online CD Axis 660 Print Server Product OverviewAxis 560 Print Server Basic Installation Hardware InventoryConnecting the printer to the Network OS/2 Windows NetWareHost Name Resolution Assigning an IP AddressAxis 560/660 User’s Guide Assigning an IP Address Setup for NetWare NetWare Using Ndps over IPNetWare Using Ndps over IPX Installing the Axis 560/660 as a Public Access printerQueue-based NetWare Printing Pure IP Connecting additional print queues Queue-based NetWare Printing IPXSetup for Windows 95/98 & NT TCP/IP Printing using Axis Print SystemNetBIOS/NetBEUI Printing using Axis Print Monitor Setup for Windows 3.1 & WfW TCP/IP Printing NetBIOS/NetBEUI PrintingAxis 560/660 User’s Guide Setup for Windows 3.1 & WfW TCP/IP Printing Setup for OS/2Installing the Axis 560/660 Creating a print queueSetup for Macintosh Setting the IP address Setup for Unix Before you startUsing IPP only for Axis Example http address schemeUsing Axis ThinWizard Management and ConfigurationUsing any standard Web browser Using Axis NetPilot Property pagesUsing FTP Using TelnetPrinting the parameter list Using the Test ButtonPrinting a test Using Snmp Using HP Administration ToolsUsing Novell Utilities
Top Page Image Contents