Axis Communications 660 manual Using Snmp, Using HP Administration Tools

Page 28

AXIS 560/660 User’s Guide

Management and Configuration

 

 

Using SNMP

You can use SNMP (Simple Network Management Protocol) for remote monitoring and configuration of the AXIS 560/660. All major functions applicable to print servers are supported.

The AXIS 560/660 supports all relevant parts of MIB-II and the host resource MIB. It also includes a private enterprise MIB called AXIS MIB. To make the full use of the SNMP support you must have an SNMP tool that allows you to install private enterprise MIBs.

The AXIS MIB can be downloaded from:

•the /software/prt_srv/utility/mib/1_14 folder on the AXIS Online CD.

•the Axis WWW home page at http://www.axis.com/.

•the AXIS 560/660 using FTP.

Follow these steps to add the AXIS MIB to your SNMP software:

1.Log in to the AXIS 560/660 using FTP.

2.Download the MIB file /snmp/axis.mib to the SNMP host.

3.Install the AXIS MIB according to instructions in your SNMP software documentation.

27

OS/2 Windows NetWare

Macintosh

Using HP Administration Tools

The AXIS 560/660 is compatible with the HP JetAdmin and the HP Web JetAdmin printer management software. This means that you may use either tool to install and configure your printer devices via your AXIS 560/660 print server. You can also use them to monitor the current status of your AXIS 560/660 and other HP JetAdmin- or HP Web JetAdmin-compatible devices connected to your network.

However, to enable support for the HP administration tools, you must set the HP_JETADMIN parameter of the AXIS 560/660 to YES.

Important:

Even though the AXIS 560/660 is compatible with the HP JetAdmin tool, it behaves slightly different than an HP print server in certain situations. Please refer to the AXIS 560/660 User’s Manual, available on the AXIS Online CD, for further information.

UNIX

Page 27 Page 29
Image 28
Page 27 Page 29
Contents I S 5 6 0 / 6 6 E r s G u i d e v 3 Management and Configuration Read me FirstSafety notices Table of Contents Axis Online CD IntroductionAxis official home Axis 560 Print Server Product OverviewAxis 660 Print Server Basic Installation Hardware InventoryConnecting the printer to the Network OS/2 Windows NetWareHost Name Resolution Assigning an IP AddressAxis 560/660 User’s Guide Assigning an IP Address Setup for NetWare NetWare Using Ndps over IPNetWare Using Ndps over IPX Installing the Axis 560/660 as a Public Access printerQueue-based NetWare Printing Pure IP Connecting additional print queues Queue-based NetWare Printing IPXSetup for Windows 95/98 & NT TCP/IP Printing using Axis Print SystemNetBIOS/NetBEUI Printing using Axis Print Monitor Setup for Windows 3.1 & WfW TCP/IP Printing NetBIOS/NetBEUI PrintingAxis 560/660 User’s Guide Setup for Windows 3.1 & WfW Setup for OS/2 Installing the Axis 560/660TCP/IP Printing Creating a print queueSetup for Macintosh Setting the IP address Setup for Unix Before you startUsing IPP only for Axis Example http address schemeUsing any standard Web browser Management and ConfigurationUsing Axis ThinWizard Using Axis NetPilot Property pagesUsing FTP Using TelnetPrinting a test Using the Test ButtonPrinting the parameter list Using Snmp Using HP Administration ToolsUsing Novell Utilities
Top Page Image Contents