Axis Communications 660 manual NetWare Using Ndps over IPX

Page 12

AXIS 560/660 User’s Guide

Setup for NetWare

 

 

NetWare Using NDPS over IPX

Installing the AXIS 560/660 as a Public Access printer:

1.Make sure that the NDPS Gateway is configured to automatically create a Public Access printer.

2.Connect the AXIS 560/660 to the NetWare network, if it is not already connected. Refer to Connecting the printer to the Network, on page 7 for more information.

3.Use the AXIS NetPilot to set the HP_JETADMIN parameter of the AXIS 560/660 to YES. The HP_JETADMIN parameter must be set to enable communication between the AXIS 560/660 and the HP NDPS Gateway. Please refer to Using AXIS NetPilot, on page 24.

Please refer to the appropriate Novell documentation for instructions on creating NDPS Manager objects and the NDPS printers.

Notes:

You can also set the HP_JETADMIN parameter of the AXIS 540/640 to YES via any standard web browser. Please refer to Using any standard Web browser, on page 23.

The Public Access print servers are immediately available to everyone on the network.

The Axis Gateway will appear in NetWare 5.1 and later releases. To use the Axis Gateway with earlier versions of NetWare, you can download the Axis Gateway Configuration utility from www.axis.com.

To print using TCP/IP, Axis print server firmware 6.1 or later is required. In order to print using IPX/SPX, Axis print server firmware 5.51 or later is needed.

11

NetWare

Image 12
Contents I S 5 6 0 / 6 6 E r s G u i d e v 3 Management and Configuration Read me FirstSafety notices Table of Contents Introduction Axis Online CDAxis official home Product Overview Axis 560 Print ServerAxis 660 Print Server Basic Installation Hardware InventoryConnecting the printer to the Network OS/2 Windows NetWareHost Name Resolution Assigning an IP AddressAxis 560/660 User’s Guide Assigning an IP Address Setup for NetWare NetWare Using Ndps over IPNetWare Using Ndps over IPX Installing the Axis 560/660 as a Public Access printerQueue-based NetWare Printing Pure IP Connecting additional print queues Queue-based NetWare Printing IPXSetup for Windows 95/98 & NT TCP/IP Printing using Axis Print SystemNetBIOS/NetBEUI Printing using Axis Print Monitor Setup for Windows 3.1 & WfW TCP/IP Printing NetBIOS/NetBEUI PrintingAxis 560/660 User’s Guide Setup for Windows 3.1 & WfW Setup for OS/2 Installing the Axis 560/660TCP/IP Printing Creating a print queueSetup for Macintosh Setting the IP address Setup for Unix Before you startUsing IPP only for Axis Example http address schemeManagement and Configuration Using any standard Web browserUsing Axis ThinWizard Using Axis NetPilot Property pagesUsing FTP Using TelnetUsing the Test Button Printing a testPrinting the parameter list Using Snmp Using HP Administration ToolsUsing Novell Utilities