Axis Communications 660 Setup for Windows 3.1 & WfW, TCP/IP Printing NetBIOS/NetBEUI Printing

Page 17

16

Setup for Windows 3.1 & WfW

AXIS 560/660 User’s Guide

 

 

 

Windows

Setup for Windows 3.1 & WfW

TCP/IP Printing

To enable TCP/IP printing in Windows 3.1 and Windows for Workgroups environments, it is recommended that you use a shareware LPR spooler that can be downloaded from ftp://ftp.axis.com/pub/axis/software/prt_srv/utility/wlprs/.

NetBIOS/NetBEUI Printing

AXIS Print Utility for Windows is the preferred tool for NetBIOS/NetBEUI printing in Windows 3.1 and Windows for Workgroups environments.

Install the AXIS Print Utility for Windows software, if you have not already done so. It is supplied in the software\prt_srv\utility\axpuw\1.04 folder on the AXIS Online CD. You can also download it from the Axis WWW home page at http://www.axis.com/.

Peer-to-peer printing - This print method is recommended for smaller networks and requires that all users install the AXIS Print Utility for Windows on their workstations. Follow these steps to install your AXIS 560/660 for peer-to-peer printing at a Windows for Workgroups or Windows 3.1 workstation:

1.Double-click the AXIS Print Utility icon.

2.In the Port menu, click Add. In the NPS Port list, select the AXIS 560/660 port to be installed. The ports appear as <name>.LP1, <name>.LP2, and <name>.CM1, where <name> is either AX followed by the last six digits of the AXIS 560/660 serial number or a name you have previously given the AXIS 560/660. For example: AX100B35.LP1 or DevDept.LP1.

3.Accept or change the suggested Windows port name, and type any comments in the Description field. Make a note of the Windows port name as you will need this later. Click OK to install the Windows port.

4.In the Port menu, click Connect to bring up the Windows Printers dialog.

5.Select a printer driver from the list of Installed Printers, or click Add>> to install a new driver. Click Connect...

6.Select the Windows port name, defined in step 3, from the Ports list.

7.Click OK to close the Connect dialog, and Close to close Printers.

Page 16 Page 18
Image 17
Page 16 Page 18
Contents I S 5 6 0 / 6 6 E r s G u i d e v 3 Read me First Management and ConfigurationSafety notices Table of Contents Axis official home IntroductionAxis Online CD Axis 660 Print Server Product OverviewAxis 560 Print Server Hardware Inventory Basic InstallationOS/2 Windows NetWare Connecting the printer to the NetworkAssigning an IP Address Host Name ResolutionAxis 560/660 User’s Guide Assigning an IP Address NetWare Using Ndps over IP Setup for NetWareInstalling the Axis 560/660 as a Public Access printer NetWare Using Ndps over IPXQueue-based NetWare Printing Pure IP Queue-based NetWare Printing IPX Connecting additional print queuesTCP/IP Printing using Axis Print System Setup for Windows 95/98 & NTNetBIOS/NetBEUI Printing using Axis Print Monitor TCP/IP Printing NetBIOS/NetBEUI Printing Setup for Windows 3.1 & WfWAxis 560/660 User’s Guide Setup for Windows 3.1 & WfW Installing the Axis 560/660 Setup for OS/2TCP/IP Printing Creating a print queueSetup for Macintosh Setting the IP address Before you start Setup for UnixExample http address scheme Using IPP only for AxisUsing Axis ThinWizard Management and ConfigurationUsing any standard Web browser Property pages Using Axis NetPilotUsing Telnet Using FTPPrinting the parameter list Using the Test ButtonPrinting a test Using HP Administration Tools Using SnmpUsing Novell Utilities
Top Page Image Contents