Axis Communications 660 manual Connecting the printer to the Network, OS/2 Windows NetWare

Page 8

AXIS 560/660 User’s Guide

Basic Installation

 

 

Connecting the printer to the Network

Follow the instructions below to connect a printer to the network via the AXIS 560/660 print server:

Caution!

The external power supply you are using must be marked with the correct mains voltage! Refer to

Hardware Inventory, on page 6.

1.Make sure that the printer is switched off and that the AXIS 560/660 external power supply is disconnected.

2.Locate the serial number, found on the underside label of the AXIS 560/660, and

write it down. You will need this number during the network configuration.

Note:

Each AXIS 560/660 Print Server is pre-configured with a unique node address that is identical to the serial number.

7

OS/2 Windows NetWare

3.Connect the printer to the LPT1, LPT2, or COM1 port on the AXIS 560/660 using an appropriate printer cable.

4.Connect your AXIS 560/660 to the network using either a twisted pair (10baseT) or thin wire (10base2) cable.

5.For the AXIS 660 only: Slide the Ring Speed switch to 4 or 16, as appropriate for your Token Ring network.

6.Switch on the printer and connect the external power supply to the AXIS 560/660. The power indicator light comes on. If the network indicator starts to flash, the AXIS 560/660 is successfully connected to the network.

7.Press and release the test button on the AXIS 560/660 to print a test page. If the AXIS 560/660 is correctly connected to the printer, the AXIS 560/660 internal test page will be printed.

Note:

The AXIS 560/660 will print to the first printer it finds on its ports LPT1, LPT2 and COM1, in that order.

UNIX Macintosh

Page 7 Page 9
Image 8
Page 7 Page 9
Contents I S 5 6 0 / 6 6 E r s G u i d e v 3 Management and Configuration Read me FirstSafety notices Table of Contents Axis official home IntroductionAxis Online CD Axis 660 Print Server Product OverviewAxis 560 Print Server Basic Installation Hardware InventoryConnecting the printer to the Network OS/2 Windows NetWareHost Name Resolution Assigning an IP AddressAxis 560/660 User’s Guide Assigning an IP Address Setup for NetWare NetWare Using Ndps over IPNetWare Using Ndps over IPX Installing the Axis 560/660 as a Public Access printerQueue-based NetWare Printing Pure IP Connecting additional print queues Queue-based NetWare Printing IPXSetup for Windows 95/98 & NT TCP/IP Printing using Axis Print SystemNetBIOS/NetBEUI Printing using Axis Print Monitor Setup for Windows 3.1 & WfW TCP/IP Printing NetBIOS/NetBEUI PrintingAxis 560/660 User’s Guide Setup for Windows 3.1 & WfW Setup for OS/2 Installing the Axis 560/660TCP/IP Printing Creating a print queueSetup for Macintosh Setting the IP address Setup for Unix Before you startUsing IPP only for Axis Example http address schemeUsing Axis ThinWizard Management and ConfigurationUsing any standard Web browser Using Axis NetPilot Property pagesUsing FTP Using TelnetPrinting the parameter list Using the Test ButtonPrinting a test Using Snmp Using HP Administration ToolsUsing Novell Utilities
Top Page Image Contents