20 | Setup for Macintosh | AXIS 560/660 User’s Guide |
|
|
|
Macintosh
Setting the IP address
Follow the
1.Open the Chooser and select a network printer driver, any LaserWriter will do.
2.Select the Axis printer port which name ends with "_CFG" and close the Chooser.
3.Open a text editor, e.g. SimpleText and write a text file containing the following:
INT_ADDR: <IP address>
Example:
INT_ADDR: 171.16.2.143
4.Print the above text file. The settings will be stored in the AXIS 560.
5.Open the Chooser and select the printer port you wish to use for printing documents. Close the Chooser.
Note:
The _CFG port disappears 60 minutes after the AXIS 560 has been powered on. If you want it to reappear, you must restart the AXIS 560.