Industry Sector, IA&DT
8.Settings on the TP700 Comfort Touch Panel
The most important panel settings have already been made in the device configuration of the panel in the WinCC project.
Select the HMI_Panel [TP700 Comfort] and click the Load to device button.
These settings are written to the panel during loading.
The most important settings can also be made directly on the panel.
The Touch Panel TP700 runs under the Windows CE operating system and can be operated, like all touch panels, directly on the screen. To make operation easier, you should use a touch pen or connect a mouse to the panel's USB port.
The desktop and the Loader window appear after the panel starts up.
At the bottom edge of the screen, there is a taskbar which you can use to start programs or adjust program settings, like with other Windows systems.
Loader buttons:
Transfer: Data transfer becomes active and data can be read in from WinCC flexible.
Start:Runtime is started and the process visualization appears on the panel.
Control Panel: Windows CE Desktop opens.
Taskbar: The taskbar opens.
SCE Training Curriculum | Page 50 of 118 | To be used only at Educational and R&D Facilities |
TIA Portal Module |
| Unrestricted / © Siemens AG 2013. All Rights Reserved |