Siemens 090-010 manual Basic objects

			Industry Sector, IA&DT
9.2	Basic objects
	Symbol	Object	Notes
		"Line"	You can choose straight, rounded or arrow-shaped line ends
		"Polyline"	A "polyline" consists of linked paths and may have any number of vertices.
			The vertices are numbered in the order of their creation. You can modify or
			delete vertices individually. You can choose straight, rounded or arrow-
			shaped line ends for the polyline. The polyline is an open object. Even if the
			start and end points have the same coordinates, the area they enclose
			cannot be filled in.
		"Polygon"	The vertices of a polygon are numbered in the order of their creation. You
			can modify or delete vertices individually. You can fill a polygon with a color
			or a pattern.
		"Ellipsis"	You can fill an ellipsis with a color or a pattern.
		"Circle"	You can fill a circle with a color or a pattern.
		"Rectangle“	You can set any rounding for the vertices of a rectangle. You can fill a
			rectangle with a color or a pattern.
		"Text field"	In a text field, you display one row or multiple rows of text and assign font
			colors and fonts to this text. You can fill a text field with a color or a pattern.
		"I/O field"	An I/O field can be assigned the following functions in Runtime:
			 Output of tag values
			 Input of values by the operator; the input values are stored in a tag
			 Combined input and output; in this case, the operator can edit the
			output tag values and thus reset them.
			You can define limits for the tag values shown in the I/O field.
			If you want to hide the operator input in Runtime, configure "Hidden input".
		"Date/time	A date/time field may have the following functions in Runtime:
		field"	 Output of the date and time
			 Combined input and output; in this case, the operator can edit the
			output values and thus reset the date or time.
			The system time or corresponding tags can be used as the source for the
			date and time.
			You can choose to have the date displayed in detail (e.g. Tuesday,
			December 31, 2003) or in short form (12/31/2003).

SCE Training Curriculum	Page 57 of 118	To be used only at Educational and R&D Facilities
TIA Portal Module 090-010, Edition 03/2013		Unrestricted / © Siemens AG 2013. All Rights Reserved

SCE_EN_090-010_R1209_ WinCC Advanced with Runtime and TP700 Comfort Panel