Industry Sector, IA&DT
2.Notes on programming for SIMATIC
2.1SIMATIC S7-300 automation system
The SIMATIC
A comprehensive range of modules is available to optimally adapt the system to the automation task. The S7 controller consists of a power supply, a CPU, and input and output modules for digital and analog signals.
If necessary, communication processors and function modules are also used for special tasks such as stepper motor control.
The programmable logic controller (PLC) uses the S7 program to monitor and control a machine or a process. The I/O modules are queried via the input addresses (%I) and addressed via the output addresses (%Q) in the S7 program.
The system is programmed with the STEP 7 software.
2.2STEP 7 Professional V11 (TIA Portal V11) programming software
STEP 7 Professional V11 (TIA Portal V11) software is the programming tool for the following automation systems
-SIMATIC
-SIMATIC
-SIMATIC
-SIMATIC WinAC
STEP 7 Professional V11 provides the following functions for plant automation:
-Configuration and parameter assignment of the hardware
-Specification of the communication
-Programming
-Testing, commissioning, and servicing with operational/diagnostic functions
-Documentation
-Creation of visualizations for SIMATIC Basic Panels using the integrated WinCC Basic software.
-Visualization solutions for PCs and other panels can also be created with other WinCC software packages
Support is provided for all functions in a comprehensive online help system.
SCE Training Curriculum | Page 7 of 118 | To be used only at Educational and R&D Facilities |
TIA Portal Module |
| Unrestricted / © Siemens AG 2013. All Rights Reserved |