Software Installation

DTU193_Manual.fm Page 17 Monday, September 15, 2008 2:42 PM

IMPORTANT: You MUST install the Wacom pen tablet driver software for correct pen-on- screen functionality.

To install the tablet software:

•Save your work and close all open applications. Temporarily disable any virus protection programs.

•Insert the Installation CD into your computer’s CD-ROM drive. If the software installer menu does not automatically display, double-click on the Install icon located on the CD.

•Click on the INSTALL TABLET link and follow the prompts to install the driver software.

•Reactivate your virus protection program.

•After completing the software installation, make sure you can use your pen on the DTU-1931 display to move the screen cursor.

When you place the pen tip on the display screen, the screen cursor should immediately jump to a corresponding position approximately beneath the pen tip. Lift the pen tip and place it on the display screen surface in a different location – the screen cursor should again jump to the new position. This is known as absolute positioning, and enables you to position the screen cursor without having to drag your pen across the display screen surface.

•Be sure to check the Read Me file for updated information. If you have trouble installing the DTU-1931, see the Troubleshooting section beginning on page 28.

Notes:

Driver installation automatically activates the new pen input functions available within Microsoft Windows Vista and Office 2007 (except for Windows Vista Home Basic). Visit the Wacom web site at www.wacom.com/vista for additional information on using your Wacom pen in Windows Vista.

User-specific preferences are supported. After logging in, each user can customize their personal settings in the Wacom Tablet control panel. Switching to another user will automatically load the settings for that user.

To uninstall the tablet driver, see Uninstalling the DTU-1931on page 43.

If the pen display tablet does not respond properly or you lose cursor control, the tablet preferences may be corrupted. You can delete the current preference settings and return the tablet to its factory default condition. On a Windows system, run the TABLET PREFERENCE FILE UTILITY. Access the utility by clicking on the Windows START icon and selecting ALL PROGRAMS. Then select WACOM TABLET and TABLET

PREFERENCE FILE UTILITY.

Next, adjust the pen display tablet calibration to precisely align the screen cursor to the pen tip. See Calibrating the DTU-1931on page 23.

Installation

Page 17