Wacom DTU-1931 Adjusting Pitch and Phase VGA only, Power Saving, Computer mode Sync, Video

DTU193_Manual.fm Page 27 Monday, September 15, 2008 2:42 PM

ADJUSTING PITCH AND PHASE (VGA ONLY)

Some computers and video cards may not allow the auto-sync function to fully work when the DTU-1931 is first connected. If some portion of text appears blurred, use the AUTO ADJUST option to automatically synchronize to the incoming signal (see the description about auto-sync on page 24). If the image is still blurred, adjust pitch and phase by following the procedure below. For optimum display quality, set your video card to the DTU-1931’s native resolution of 1280 x 1024.

•In the Wacom Tablet control panel, select the CALIBRATE tab.

•If you are working with multiple displays, be sure the display corresponding to the DTU-1931 is selected in the MONITOR menu.

•Click on the CALIBRATE... button to activate the calibration screen.

•Using the OSD controls, open the OSD menu and select the PITCH option. Then adjust the pitch level so that the pattern of fine vertical stripes displays evenly. (For details on changing the OSD settings, see On Screen Display (OSD) settings on page 24.)

•In the OSD menu, select the PHASE option. Adjust the phase level so that the adjustment pattern shows clearly.

•After completing these adjustments, press the ENTER and MENU buttons to exit the OSD menu.

•Click on the CANCEL button or press ESC to exit the calibration screen.

Adjustment pattern for pitch and phase.

POWER SAVING

The DTU-1931 conforms to VESA and ENERGY STAR® power saving guidelines.

When using the DTU-1931 with a Display Power Management Signaling (DPMS) compliant computer or video card, the display will automatically comply with the below power saving parameters.

When these power-saving functions are in effect, the screen display is darker than usual.

Computer mode	H-sync	V-sync	Video	Power consumption	Power lamp
Power ON	Yes	Yes	Active	37W, max.	Blue
Standby mode	No	Yes	Blanked	2W, max.	Blue/Orange*
Suspend mode	Yes	No	Blanked	2W, max.	Blue/Orange*
OFF mode	No	No	Blanked	1W, max.	Orange

*Depending on the specifications and settings of your computer and video card, the power light may only change to orange when in standby and suspend modes.

Customizing

Page 27