Toshiba P000233790, PCX 5000 owner manual You may also check the PCX5000 status

The following sections describe how to configure the network and security settings for the PCX5000. You should be able to access these settings once you have completed the Ethernet or USB installation for your computer. In most cases, you will not need to change the default settings of the PCX5000.

If you plan to use the wireless access capability of the PCX5000, please review the “PCX5000 Wireless Configuration” section to set your security parameters. The default settings do not protect your home network from an attack by an unauthorized wireless user.

The PCX5000 contains an embedded Web server that allows you to change its configuration. The PCX5000 configuration web pages may be accessed through any Internet browser such as Microsoft Internet Explorer (5.0 or later recommended).

These web pages are password protected to prevent unauthorized changes.

The PCX5000 configuration options are available in these web page locations:

Configuration Option:

Turn the firewall On/Off (default: On) Setup access rules

Setup DMZ (Demilitarized Zone) Setup host name

Setup fixed IP addresses for modem, PC’s Change modem’s DHCP server settings Change modem’s password

Upgrade firewall security Enable wireless encryption

You may also check the PCX5000 status:

View firewall report

View Internet statistics

View modem Status

PCX5000 Web page location:

see “Security->Firewall” Web page “Security->Allow” “Security->DMZ” “System->Internet->Advanced Setup” “System->Internet->Advanced Setup” “System->My Network” “System->Password” “System->Upgrade”

“Wireless”

see “Security->Report” “Security->Report” “Status”

To access the PCX5000 Web page:

1.Launch Web browser(Internet Explorer 5.0 or later recommended) on a computer connected to the PCX5000.

2.Go to address: http://192.168.100.1

The PCX5000 Welcome page will appear.

4