Toshiba PCX5000, P000233790, PCX 5000 owner manual Macintosh OS X Configuration Ethernet Settings

Macintosh OS X Configuration

Ethernet Settings

The following screen shots give an example of how to configure the network settings for a Macintosh OS X computer.

Step 1: At the Macintosh desktop, select the Apple icon at the top left of the screen, click on “System Preferences”, then select and click on the “Network” icon at the top of the panel.

Step 2: In the Network panel, Select “Active Network Ports” in the Show choice box to verify your networking interfaces (Built-in Ethernet, Add-on Ethernet, or AirPort) are active.

Step 3: Then select the Ethernet port you are using to connect your Macintosh to the PCX5000 in the Show choice box. The default port is “Built–in Ethernet”. Click on the TCP/IP tab and select “Using DHCP” in the Configure choice box.

Step 4: Click the “Apply Now” button at the bottom right corner of the menu.

Step 5: You should now be able to access the PCX5000 configuration pages. Launch the browser supplied with the Macintosh and

open location: ”http://192.168.100.1” Proceed now to the “Configuring the PCX5000 Gateway” section of this manual.

2