Toshiba TOPAS900 user manual TMPro ROM-Monitor

Users Manual TOPAS900 Flash V2.1

where the Debugger places temporary files. Confirm this dialog for the next step. Script File and Startup Label can be left unchanged. Confirm the dialog to get to the next dialog.

∙This dialog has no effect for the ROM monitor operation and should be confirmed unchanged.

∙This dialog asks for a filename for the new profile that has been created in the steps before. The default name

is ..\profile1.tdp. Choose a meaningful name for the project like leddim.abs. After confirmation of this last step the profile is created and stored to disk. The abs-file will be loaded. Check the information given at the bottom of the TMPro window about the loading of debug information or warnings or error messages. When the profile is double-clicked in the Windows-

Explorer the TMPro Debugger is started automatically with all the setting contained in the profile.

4.2.3. TMPro ROM-Monitor

Using the Toshiba environment makes need of changing the ROM-Monitor in TOPAS900 Flash board because the IAR C-SPY Monitor is installed by default. For programming the on-board (external) flash memory with the TMPro Monitor please refer to section 5.2. The file that is to be programmed into external flash ROM is named Toshiba.h20.The speed of serial RS-232 link to the PC is always 38400 baud. After starting the monitor (by pressing the reset button) the yellow led flashes to show that the monitor is running.

HWU Elektronik Oberhausen Page 25