Toshiba T2 Series user manual Example Configuration Settings

Page 18

Example Configuration Settings:

This section shows how to set the card up for network station address 2, 9600 baud, and no parity.

1)“ASY and DLY”

Set these to the Off position.

2)"Station Address"

•Set the Station number on the rotary switch to 2.

•Set the HAD switch to OFF because our address is less than 16.

3)"Communication speed"

For 9600 baud, the following settings are required.

•BR2 is on

•BR1 is on

•BR0 is off

Page 12

Image 18

Contents Prosec T2-Series Important Information Safety Precautions Hazard ClassificationsAbout This Guide Contents Page Overview System Configuration To 1 ConfigurationModbus Module To N Configuration External Features and Switch Settings Specifications Modbus Module Operation Modbus Commands Modbus Function Code T2 CommandModbus Data Types and T2 Register Mapping Data Type Attribute Modbus No OffsetReg/Device Address T2 Restricted Registers Modbus T2 Address mapping ExampleModbus Module Setup Modbus Module DIP Switch SettingsStation Number BR2 BR1 BR0 ReservedParity ASY and DLY switchesParity Check PEN EVNExample Configuration Settings ASY DLY Had BR2 BR1 BR0 PEN EVN Wiring Connection to the Modbus Module CPU Setup for the Modbus Module Trouble Shooting If the LED indicators are not flashing, check the followingIf the LED indicators are on solid Additional References Toshiba International Corporation Toshiba Corporation Toshiba do BRASIL, S.A