Toshiba T2 Series user manual Important Information

Page 2

Important Information

Misuse of this equipment can result in property damage or human injury. Because controlled system applications vary widely, you should satisfy yourself as to the acceptability of this equipment for your intended purpose.

In no event will Toshiba Corporation be responsible or liable for either indirect

or consequential damage or injury that may result from the use of this equipment.

No patent liability is assumed by Toshiba Corporation with respect to use of information, illustrations, circuits, equipment or examples of application in this publication.

Toshiba Corporation reserves the right to make changes and improvements to this publication and/or related products at any time without notice. No obligation shall be incurred other than as noted in this publication.

This publication is copyrighted and contains proprietary material. No part of this book may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means electrical, mechanical, photocopying, recording, or otherwise without obtaining prior written permission from Toshiba Corporation.

© TOSHIBA Corporation 1998. All rights reserved

PROSEC and TOSLINE are registered trademarks of TOSHIBA Corporation.

Publication number: UG-TSxx∗∗∗-Exxx 1st edition August 1992

2nd edition March 1999

Page ii

Image 2
Contents Prosec T2-Series Important Information Safety Precautions Hazard ClassificationsAbout This Guide Contents Page Overview Modbus Module System ConfigurationTo 1 Configuration To N Configuration External Features and Switch Settings Specifications Modbus Module Operation Modbus Commands Modbus Function Code T2 CommandReg/Device Address T2 Modbus Data Types and T2 Register MappingData Type Attribute Modbus No Offset Restricted Registers Modbus T2 Address mapping ExampleStation Number Modbus Module SetupModbus Module DIP Switch Settings BR2 BR1 BR0 ReservedParity ASY and DLY switchesParity Check PEN EVNExample Configuration Settings ASY DLY Had BR2 BR1 BR0 PEN EVN Wiring Connection to the Modbus Module CPU Setup for the Modbus Module If the LED indicators are on solid Trouble ShootingIf the LED indicators are not flashing, check the following Additional References Toshiba International Corporation Toshiba Corporation Toshiba do BRASIL, S.A