Toshiba T2 Series user manual About This Guide

Page 4

About This Guide

This guide describes how to setup and use the Toshiba EX10-MML11 Modbus module. When used in a Modbus network, the EX10-MML11 module allows any Modbus master to write to/read from the registers in an EX100 or T2 PLC using standard Modbus RTU protocol.

Page iv

Image 4

Contents Prosec T2-Series Important Information Safety Precautions Hazard ClassificationsAbout This Guide Contents Page Overview To 1 Configuration System ConfigurationModbus Module To N Configuration External Features and Switch Settings Specifications Modbus Module Operation Modbus Commands Modbus Function Code T2 CommandData Type Attribute Modbus No Offset Modbus Data Types and T2 Register MappingReg/Device Address T2 Restricted Registers Modbus T2 Address mapping ExampleModbus Module DIP Switch Settings Modbus Module SetupStation Number BR2 BR1 BR0 ReservedASY and DLY switches Parity CheckParity PEN EVNExample Configuration Settings ASY DLY Had BR2 BR1 BR0 PEN EVN Wiring Connection to the Modbus Module CPU Setup for the Modbus Module If the LED indicators are not flashing, check the following Trouble ShootingIf the LED indicators are on solid Additional References Toshiba International Corporation Toshiba Corporation Toshiba do BRASIL, S.A