Toshiba T2 Series user manual ASY DLY Had BR2 BR1 BR0 PEN EVN

Page 19

4)"Parity check"

For No Parity, the following settings are required.

•PEN is off.

•EVN is off.

OFF ON

ASY

DLY

HAD

BR2

BR1

BR0

PEN

EVN

Switch settings for 9600 baud, no parity, and address less than 16.

Page 13

Image 19

Contents Prosec T2-Series Important Information Hazard Classifications Safety PrecautionsAbout This Guide Contents Page Overview To 1 Configuration System ConfigurationModbus Module To N Configuration External Features and Switch Settings Specifications Modbus Function Code T2 Command Modbus Module Operation Modbus CommandsData Type Attribute Modbus No Offset Modbus Data Types and T2 Register MappingReg/Device Address T2 Modbus T2 Address mapping Example Restricted RegistersModbus Module DIP Switch Settings Modbus Module SetupStation Number Reserved BR2 BR1 BR0PEN EVN ASY and DLY switchesParity Check ParityExample Configuration Settings ASY DLY Had BR2 BR1 BR0 PEN EVN Wiring Connection to the Modbus Module CPU Setup for the Modbus Module If the LED indicators are not flashing, check the following Trouble ShootingIf the LED indicators are on solid Additional References Toshiba do BRASIL, S.A Toshiba International Corporation Toshiba Corporation