Toshiba EO1-13016, TRST-56 SERIES owner manual Receipt Roll

2. SPECIFICATIONS EO1-13016

2.2 Receipt Roll

2.2 Receipt Roll

Width (W)

Paper thickness (T)

Outer diameter (D)

Inner core	Outer core
diameter (ID)	diameter (OD)

Paper type	Thermal paper rolled with the print side facing outside
Width (W)	80 +0/-1 mm
Outer diameter (D)	80 +0.5/-1 mm
Paper thickness (T)	0.075±0.005 mm
Weight	69±3g/m2
Outer core diameter	18 mm
Inner core diameter	12 mm
Recommended thermal paper	Only paper rolled onto a core is acceptable, however, the paper end
	should not be pasted to the core.
	Normal paper:	PD150R OHJI PAPER (Japan)
	Long storable paper: PD152R OHJI PAPER (Japan)

CAUTION!

Use only paper which meets specified requirements. Use of non-specified paper may shorten the head life of the printer, resulting in problems with print quality, cause a paper feed failure or shorten the cutter life. All paper should be handled with care to avoid any damage to the paper. Read the following guideline carefully.

∙Do not store the paper for longer than the manufacturer’s recommended shelf life.

∙Store the paper in a cool, dry place. Avoid areas where they would be exposed to direct sunlight, high temperature, high humidity, dust or gas.

∙A contact of chemical or oil may discolour or erase the printed record.

∙Rubbing the paper hard with nail or hard object may discolour the paper.

∙The paper end should not be pasted to the core.

For further information please contact your authorised TOSHIBA TEC representative or authorised paper manufacturer.

2- 2